SCL-Templates fuer alle Typen mit Referenz-Aufrufstelle (Schritt 5)
- neue Templates: FB_ILS_MTRO_1Sep (TRO100), _Vario (TRO115), _Vario_workStation (TRO421), _1Sep2Swi (TRO267), _1Sep_SSCC (TRO105), _PinStore_Auto (TRO208); zusammen mit dem Pilot 1Sep1Swi 7 von 11 Typen. 2Sep1Swi, EmptyCarrBuffer, LoadingBoom, 2Sep2Swi bleiben generisch (keine reale Aufrufstelle) - scl_context: Felder nur fuer die Templates - Cognex-Verdrahtung je Scanner, part_sensor, carriers/data je Staubereich, jam_in/jam_out (dieselben Objekte wie erster Ein-/Ausgang), error_quit, automatic, is_border, correction_station, Bloecke sscc/work_station/store (PinStore: eine Linie je Speicherbahn aus dem Layout statt der 19 aus dem Katalog) - _macros: cognex_in/cognex_out/cognex, correction, todo_mehr - tests/test_scl_templates.py: Rundlauf je Template gegen seine Referenz (PinStore: von der Referenz abgekuerzte Teile ausgenommen); Normalisierung vereinheitlicht ":="/"=>"-Abstaende - Golden-Files *_templates neu geschrieben (gewollt: mehr TROs aus Templates); generische Golden-Files unveraendert - Doku: SCL_Templates.md (§6 Entscheidungen je Template, §11 Schritt 5, §13 offene Fragen 9-12), Python_Scripts.md, CLAUDE.md, README.md Zeilenentscheidungen sind Vorschlaege, noch mit den SPS-Kollegen zu bestaetigen. Geprueft: 39 Tests gruen, jede Rundlauf-Pruefung erkennt eine geaenderte Zeile; tro_flow --json + scl_skeleton --templates auf allen 8 CSVs ohne Fehler. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
Samer Ayadi
co-authored by
Claude Opus 5.5
Claude Opus 5.5
parent
5764df1ac8
commit
41df841317
+355
-237
@@ -16,8 +16,8 @@
|
||||
// Reihenfolge der REGIONs = Materialfluss.
|
||||
// Anfang bei TRO20: Materialeingang ueber SYS1, SYS2.
|
||||
//
|
||||
// Aus Template : FB_ILS_MTRO_1Sep1Swi
|
||||
// Generisch : FB_ILS_MTRO_1Sep, FB_ILS_MTRO_Vario (kein Template - von Hand pruefen)
|
||||
// Aus Template : FB_ILS_MTRO_1Sep, FB_ILS_MTRO_1Sep1Swi, FB_ILS_MTRO_Vario
|
||||
// Generisch : - (kein Template - von Hand pruefen)
|
||||
// ============================================================
|
||||
|
||||
FUNCTION_BLOCK "FB_Main"
|
||||
@@ -53,9 +53,10 @@ REGION TRO20 (1Sep) Sep 0007
|
||||
// Vorgaenger: SYS1, SYS2, TRO19
|
||||
// Nachfolger: TRO01
|
||||
// Einstufung: mittel
|
||||
// Aufbau nach Template FB_ILS_MTRO_1Sep.scl.j2 (Referenz: doc/TRO_Katalog/scl_templates)
|
||||
|
||||
// Separator 1 = Bauteil 0007 aus dem Layout
|
||||
#TRO20.stInSeparator1.Settings.nSeparatorNo := "cSep_____"; // TODO(E-Planung)
|
||||
#TRO20.stInSeparator1.Settings.nSeparatorNo := "cSep_____"; // TODO(E-Planung)
|
||||
#TRO20.stInSeparator1.Settings.tDelayToNextItem := "TimeForSepWaiting_Short";
|
||||
#TRO20.stInSeparator1.Settings.tTrailingTime := t#600ms; // TODO(E-Planung): pruefen
|
||||
#TRO20.stInSeparator1.Settings.tHandlingTime := t#200ms; // TODO(E-Planung): pruefen
|
||||
@@ -64,28 +65,32 @@ REGION TRO20 (1Sep) Sep 0007
|
||||
#TRO20.stInSeparator1.Settings.xPluggedPart := FALSE;
|
||||
#TRO20.stInSeparator1.Settings.xPluggedScanner := FALSE;
|
||||
#TRO20.stInSeparator1.stSenInSep := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
#TRO20.stInSeparator1.Settings.tSenFree := T#1500ms; // TODO(E-Planung): pruefen
|
||||
#TRO20.stInSeparator1.Settings.tSenWait := T#4000ms; // TODO(E-Planung): pruefen
|
||||
#TRO20.stInSenJam2 := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
|
||||
#TRO20.stInPriorityManager.xReleaseOk := TRUE;
|
||||
#TRO20.stInSeparator1.Settings.tSenFree := T#1500ms; // TODO(E-Planung): pruefen
|
||||
#TRO20.stInSeparator1.Settings.tSenWait := T#4000ms; // TODO(E-Planung): pruefen
|
||||
|
||||
#TRO20.stInPriorityManager.xReleaseOk := TRUE; // braucht keine Vorfahrtsregelung
|
||||
|
||||
#TRO20(nInMainTroNo := "cMainTro____", // TODO(E-Planung)
|
||||
xInSftyOk := "DB_InterfaceSafety".stFromSafety.EStopMain.Q, // TODO(E-Planung)
|
||||
xInAllRdyToStart := TRUE,
|
||||
xInCarouselRun := #fbCarousel____.xOutConveyorFullSpeed, // TODO(E-Planung) - nur am Kreisel, sonst Zeile loeschen
|
||||
xInRelease := "DB_TRO_TEST".TRO20,
|
||||
stInOutMachineState := #stInOutControlUnitCabinet,
|
||||
stInOutMachineState := #stInOutControlUnitCabinet, // TODO(E-Planung) - Schaltschrank
|
||||
stInOutCognexInterface := #stCognexInterfaceDummy,
|
||||
arInOutJamEntr1 := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich von SYS1 (Station, kein TRO)
|
||||
stInOutJamEntr1 := "DB_JamArea____".stJam____.stData,
|
||||
stInOutJamEntr1 := "DB_JamArea____".stJam____.stData, // TODO(E-Planung)
|
||||
arInOutJamEntr2 := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich von SYS2 (Station, kein TRO)
|
||||
stInOutJamEntr2 := "DB_JamArea____".stJam____.stData,
|
||||
stInOutJamEntr2 := "DB_JamArea____".stJam____.stData, // TODO(E-Planung)
|
||||
arInOutJamEntr3 := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich von TRO19
|
||||
stInOutJamEntr3 := "DB_JamArea____".stJam____.stData,
|
||||
stInOutJamEntr3 := "DB_JamArea____".stJam____.stData, // TODO(E-Planung)
|
||||
arInOutJamExit2 := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich nach TRO01
|
||||
stInOutJamExit2 := "DB_JamArea____".stJam____.stData,
|
||||
stInOutJamExit2 := "DB_JamArea____".stJam____.stData, // TODO(E-Planung)
|
||||
xOutStopper1 => "MB____", // TODO(E-Planung)
|
||||
stInOutHMI := "DB_Interface_HMI".stTRO.TRO20,
|
||||
nOutStateLast => "DB_GLOB_TroState".arTroState["cMainTro____"]); // TODO(E-Planung)
|
||||
nOutStateLast => "DB_GLOB_TroState".arTroState["cMainTro____"], // TODO(E-Planung)
|
||||
stInOutHMI := "DB_Interface_HMI".stTRO.TRO20);
|
||||
|
||||
END_REGION
|
||||
|
||||
REGION TRO01 (1Sep1Swi) Sep 0008
|
||||
@@ -152,52 +157,64 @@ REGION TRO02 (Vario) Sep 0025
|
||||
// Vorgaenger: TRO01
|
||||
// Nachfolger: TRO03
|
||||
// Einstufung: hoch
|
||||
// Aufbau nach Template FB_ILS_MTRO_Vario.scl.j2 (Referenz: doc/TRO_Katalog/scl_templates)
|
||||
|
||||
// Separator 1 = Bauteil 0025 aus dem Layout
|
||||
#TRO02.stInSeparator1.Settings.nSeparatorNo := "cSep_____"; // TODO(E-Planung)
|
||||
#TRO02.stInSeparator1.Settings.nSeparatorNo := "cSep_____"; // TODO(E-Planung)
|
||||
#TRO02.stInSeparator1.Settings.tDelayToNextItem := "TimeForSepWaiting_Short";
|
||||
#TRO02.stInSeparator1.Settings.tTrailingTime := t#600ms; // TODO(E-Planung): pruefen
|
||||
#TRO02.stInSeparator1.Settings.tHandlingTime := t#200ms; // TODO(E-Planung): pruefen
|
||||
#TRO02.stInSeparator1.Settings.tTrailingTime := t#800ms; // TODO(E-Planung): pruefen
|
||||
#TRO02.stInSeparator1.Settings.tHandlingTime := t#300ms; // TODO(E-Planung): pruefen
|
||||
#TRO02.stInSeparator1.Settings.tJam := "TimeForSepJam";
|
||||
#TRO02.stInSeparator1.Settings.xPluggedJam := TRUE;
|
||||
#TRO02.stInSeparator1.Settings.xPluggedJam := FALSE;
|
||||
#TRO02.stInSeparator1.Settings.xPluggedPart := FALSE;
|
||||
#TRO02.stInSeparator1.Settings.xPluggedScanner := FALSE;
|
||||
#TRO02.stInSeparator1.stSenInSep := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
#TRO02.stInSeparator1.Settings.tSenFree := T#1500ms; // TODO(E-Planung): pruefen
|
||||
#TRO02.stInSeparator1.Settings.tSenWait := T#4000ms; // TODO(E-Planung): pruefen
|
||||
|
||||
#TRO02.stInSeparator1.Settings.tSenFree := t#2000ms; // TODO(E-Planung): pruefen
|
||||
#TRO02.stInSeparator1.Settings.tSenWait := T#5000ms; // TODO(E-Planung): pruefen
|
||||
|
||||
#TRO02.stInVario.Settings.xContinousEmptying := FALSE;
|
||||
#TRO02.stInVario.Settings.tWaitForJog := T#300ms; // TODO(E-Planung): pruefen
|
||||
#TRO02.stInVario.Settings.tConvEmpty := T#45000ms; // TODO(E-Planung): pruefen
|
||||
#TRO02.stInVario.Settings.nCountCarrier := 1; // TODO(E-Planung): pruefen
|
||||
#TRO02.stInVario.Settings.tWaitForJog := T#300ms; // TODO(E-Planung): pruefen
|
||||
#TRO02.stInVario.Settings.tConvEmpty := T#45000ms; // TODO(E-Planung): pruefen
|
||||
#TRO02.stInVario.Settings.nCountCarrier := 1; // TODO(E-Planung): pruefen
|
||||
#TRO02.stInVario.Settings.tWaitForStop := t#3s;
|
||||
|
||||
#TRO02.stInVario.Settings.tCarrierInPosDelay := t#1200ms;
|
||||
#TRO02.stInVario.Settings.tCarrierInPosEdgeDelay := t#100ms;
|
||||
|
||||
#TRO02.stInVario.Settings.tRasterHigh := t#5s; // TODO(E-Planung): pruefen
|
||||
#TRO02.stInVario.Settings.tRasterLow := t#5s; // TODO(E-Planung): pruefen
|
||||
|
||||
#TRO02.stInVario.stSenCarrInPos := "DB_Inputs".Sensors["cInBG____"]; // MT in Pos - TODO(E-Planung)
|
||||
#TRO02.stInVario.stSenFinger := "DB_Inputs".Sensors["cInBG____"]; // Pusher Dog in Pos - TODO(E-Planung)
|
||||
#TRO02.stInVario.stSenLastPos := "DB_Inputs".Sensors["cInBG____"]; // Conveyor full - TODO(E-Planung)
|
||||
#TRO02.stInVario.stSenJam := "DB_Inputs".Sensors["cInBG____"]; // Jam detector - TODO(E-Planung)
|
||||
|
||||
#TRO02.stInPriorityManager.xReleaseOk := TRUE; // braucht keine Vorfahrtsregelung
|
||||
#TRO02.stInVario.Settings.xJamSenDelayActive := TRUE;
|
||||
#TRO02.stInVario.Settings.tJamSenDelay := T#2s;
|
||||
#TRO02.stInVario.stSenCarrInPos := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
#TRO02.stInVario.stSenFinger := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
#TRO02.stInVario.stSenLastPos := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
#TRO02.stInVario.stSenJam := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
|
||||
#TRO02.stInPriorityManager.xReleaseOk := TRUE;
|
||||
#TRO02.stInSettings.xIsBorner := TRUE; // TODO(E-Planung) - pruefen - Bedeutung mit SPS klaeren
|
||||
|
||||
#TRO02(nInMainTroNo := "cMainTro____", // TODO(E-Planung)
|
||||
xInSftyOk := "DB_InterfaceSafety".stFromSafety.EStopMain.Q, // TODO(E-Planung)
|
||||
xInAllRdyToStart := TRUE,
|
||||
xInRelease := "DB_TRO_TEST".TRO02,
|
||||
xInMotorProtection := "FC____", // TODO(E-Planung)
|
||||
xInAutomatic := #t_automatik,
|
||||
stInOutMachineState := #stInOutControlUnitCabinet,
|
||||
xInAllRdyToStart := TRUE,
|
||||
xInReset := "cTodoFalse",
|
||||
xInErrorQuit := "SF____", // TODO(E-Planung) - Quittierung
|
||||
xInAutomatic := #t_automatik, // TODO(E-Planung) - Automatik des Schaltschranks
|
||||
xInRelease := "DB_TRO_TEST".TRO02,
|
||||
arInOutJamEntr := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich von TRO01
|
||||
stInOutJamEntr := "DB_JamArea____".stJam____.stData, // TODO(E-Planung)
|
||||
arInOutJamFinger := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich nach TRO03
|
||||
stInOutJamFinger := "DB_JamArea____".stJam____.stData, // TODO(E-Planung)
|
||||
stInOutMachineState := #stInOutControlUnitCabinet, // TODO(E-Planung) - Schaltschrank
|
||||
stInOutCognexInterface := #stCognexInterfaceDummy,
|
||||
arInOutJamEntr1 := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich von TRO01
|
||||
stInOutJamEntr1 := "DB_JamArea____".stJam____.stData,
|
||||
arInOutJamExit2 := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich nach TRO03
|
||||
stInOutJamExit2 := "DB_JamArea____".stJam____.stData,
|
||||
xOutStopper1 => "MB____", // TODO(E-Planung)
|
||||
xOutVarioMotor => "MA____", // TODO(E-Planung)
|
||||
stInOutHMI := "DB_Interface_HMI".stTRO.TRO02,
|
||||
nOutStateLast => "DB_GLOB_TroState".arTroState["cMainTro____"]); // TODO(E-Planung)
|
||||
nOutStateLast => "DB_GLOB_TroState".arTroState["cMainTro____"], // TODO(E-Planung)
|
||||
xOutStopper => "MB____", // TODO(E-Planung)
|
||||
xOutVarioMotor => "MA____"); // TODO(E-Planung)
|
||||
|
||||
END_REGION
|
||||
|
||||
REGION TRO06 (1Sep1Swi) Sep 0010
|
||||
@@ -266,9 +283,10 @@ REGION TRO03 (1Sep) Sep 0026
|
||||
// Vorgaenger: TRO02
|
||||
// Nachfolger: TRO04
|
||||
// Einstufung: mittel
|
||||
// Aufbau nach Template FB_ILS_MTRO_1Sep.scl.j2 (Referenz: doc/TRO_Katalog/scl_templates)
|
||||
|
||||
// Separator 1 = Bauteil 0026 aus dem Layout
|
||||
#TRO03.stInSeparator1.Settings.nSeparatorNo := "cSep_____"; // TODO(E-Planung)
|
||||
#TRO03.stInSeparator1.Settings.nSeparatorNo := "cSep_____"; // TODO(E-Planung)
|
||||
#TRO03.stInSeparator1.Settings.tDelayToNextItem := "TimeForSepWaiting_Short";
|
||||
#TRO03.stInSeparator1.Settings.tTrailingTime := t#600ms; // TODO(E-Planung): pruefen
|
||||
#TRO03.stInSeparator1.Settings.tHandlingTime := t#200ms; // TODO(E-Planung): pruefen
|
||||
@@ -277,24 +295,28 @@ REGION TRO03 (1Sep) Sep 0026
|
||||
#TRO03.stInSeparator1.Settings.xPluggedPart := FALSE;
|
||||
#TRO03.stInSeparator1.Settings.xPluggedScanner := FALSE;
|
||||
#TRO03.stInSeparator1.stSenInSep := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
#TRO03.stInSeparator1.Settings.tSenFree := T#1500ms; // TODO(E-Planung): pruefen
|
||||
#TRO03.stInSeparator1.Settings.tSenWait := T#4000ms; // TODO(E-Planung): pruefen
|
||||
#TRO03.stInSenJam2 := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
|
||||
#TRO03.stInPriorityManager.xReleaseOk := TRUE;
|
||||
#TRO03.stInSeparator1.Settings.tSenFree := T#1500ms; // TODO(E-Planung): pruefen
|
||||
#TRO03.stInSeparator1.Settings.tSenWait := T#4000ms; // TODO(E-Planung): pruefen
|
||||
|
||||
#TRO03.stInPriorityManager.xReleaseOk := TRUE; // braucht keine Vorfahrtsregelung
|
||||
|
||||
#TRO03(nInMainTroNo := "cMainTro____", // TODO(E-Planung)
|
||||
xInSftyOk := "DB_InterfaceSafety".stFromSafety.EStopMain.Q, // TODO(E-Planung)
|
||||
xInAllRdyToStart := TRUE,
|
||||
xInCarouselRun := #fbCarousel____.xOutConveyorFullSpeed, // TODO(E-Planung) - nur am Kreisel, sonst Zeile loeschen
|
||||
xInRelease := "DB_TRO_TEST".TRO03,
|
||||
stInOutMachineState := #stInOutControlUnitCabinet,
|
||||
stInOutMachineState := #stInOutControlUnitCabinet, // TODO(E-Planung) - Schaltschrank
|
||||
stInOutCognexInterface := #stCognexInterfaceDummy,
|
||||
arInOutJamEntr1 := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich von TRO02
|
||||
stInOutJamEntr1 := "DB_JamArea____".stJam____.stData,
|
||||
stInOutJamEntr1 := "DB_JamArea____".stJam____.stData, // TODO(E-Planung)
|
||||
arInOutJamExit2 := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich nach TRO04
|
||||
stInOutJamExit2 := "DB_JamArea____".stJam____.stData,
|
||||
stInOutJamExit2 := "DB_JamArea____".stJam____.stData, // TODO(E-Planung)
|
||||
xOutStopper1 => "MB____", // TODO(E-Planung)
|
||||
stInOutHMI := "DB_Interface_HMI".stTRO.TRO03,
|
||||
nOutStateLast => "DB_GLOB_TroState".arTroState["cMainTro____"]); // TODO(E-Planung)
|
||||
nOutStateLast => "DB_GLOB_TroState".arTroState["cMainTro____"], // TODO(E-Planung)
|
||||
stInOutHMI := "DB_Interface_HMI".stTRO.TRO03);
|
||||
|
||||
END_REGION
|
||||
|
||||
REGION TRO07 (Vario) Sep 0031
|
||||
@@ -302,52 +324,64 @@ REGION TRO07 (Vario) Sep 0031
|
||||
// Vorgaenger: TRO06
|
||||
// Nachfolger: TRO08
|
||||
// Einstufung: hoch
|
||||
// Aufbau nach Template FB_ILS_MTRO_Vario.scl.j2 (Referenz: doc/TRO_Katalog/scl_templates)
|
||||
|
||||
// Separator 1 = Bauteil 0031 aus dem Layout
|
||||
#TRO07.stInSeparator1.Settings.nSeparatorNo := "cSep_____"; // TODO(E-Planung)
|
||||
#TRO07.stInSeparator1.Settings.nSeparatorNo := "cSep_____"; // TODO(E-Planung)
|
||||
#TRO07.stInSeparator1.Settings.tDelayToNextItem := "TimeForSepWaiting_Short";
|
||||
#TRO07.stInSeparator1.Settings.tTrailingTime := t#600ms; // TODO(E-Planung): pruefen
|
||||
#TRO07.stInSeparator1.Settings.tHandlingTime := t#200ms; // TODO(E-Planung): pruefen
|
||||
#TRO07.stInSeparator1.Settings.tTrailingTime := t#800ms; // TODO(E-Planung): pruefen
|
||||
#TRO07.stInSeparator1.Settings.tHandlingTime := t#300ms; // TODO(E-Planung): pruefen
|
||||
#TRO07.stInSeparator1.Settings.tJam := "TimeForSepJam";
|
||||
#TRO07.stInSeparator1.Settings.xPluggedJam := TRUE;
|
||||
#TRO07.stInSeparator1.Settings.xPluggedJam := FALSE;
|
||||
#TRO07.stInSeparator1.Settings.xPluggedPart := FALSE;
|
||||
#TRO07.stInSeparator1.Settings.xPluggedScanner := FALSE;
|
||||
#TRO07.stInSeparator1.stSenInSep := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
#TRO07.stInSeparator1.Settings.tSenFree := T#1500ms; // TODO(E-Planung): pruefen
|
||||
#TRO07.stInSeparator1.Settings.tSenWait := T#4000ms; // TODO(E-Planung): pruefen
|
||||
|
||||
#TRO07.stInSeparator1.Settings.tSenFree := t#2000ms; // TODO(E-Planung): pruefen
|
||||
#TRO07.stInSeparator1.Settings.tSenWait := T#5000ms; // TODO(E-Planung): pruefen
|
||||
|
||||
#TRO07.stInVario.Settings.xContinousEmptying := FALSE;
|
||||
#TRO07.stInVario.Settings.tWaitForJog := T#300ms; // TODO(E-Planung): pruefen
|
||||
#TRO07.stInVario.Settings.tConvEmpty := T#45000ms; // TODO(E-Planung): pruefen
|
||||
#TRO07.stInVario.Settings.nCountCarrier := 1; // TODO(E-Planung): pruefen
|
||||
#TRO07.stInVario.Settings.tWaitForJog := T#300ms; // TODO(E-Planung): pruefen
|
||||
#TRO07.stInVario.Settings.tConvEmpty := T#45000ms; // TODO(E-Planung): pruefen
|
||||
#TRO07.stInVario.Settings.nCountCarrier := 1; // TODO(E-Planung): pruefen
|
||||
#TRO07.stInVario.Settings.tWaitForStop := t#3s;
|
||||
|
||||
#TRO07.stInVario.Settings.tCarrierInPosDelay := t#1200ms;
|
||||
#TRO07.stInVario.Settings.tCarrierInPosEdgeDelay := t#100ms;
|
||||
|
||||
#TRO07.stInVario.Settings.tRasterHigh := t#5s; // TODO(E-Planung): pruefen
|
||||
#TRO07.stInVario.Settings.tRasterLow := t#5s; // TODO(E-Planung): pruefen
|
||||
|
||||
#TRO07.stInVario.stSenCarrInPos := "DB_Inputs".Sensors["cInBG____"]; // MT in Pos - TODO(E-Planung)
|
||||
#TRO07.stInVario.stSenFinger := "DB_Inputs".Sensors["cInBG____"]; // Pusher Dog in Pos - TODO(E-Planung)
|
||||
#TRO07.stInVario.stSenLastPos := "DB_Inputs".Sensors["cInBG____"]; // Conveyor full - TODO(E-Planung)
|
||||
#TRO07.stInVario.stSenJam := "DB_Inputs".Sensors["cInBG____"]; // Jam detector - TODO(E-Planung)
|
||||
|
||||
#TRO07.stInPriorityManager.xReleaseOk := TRUE; // braucht keine Vorfahrtsregelung
|
||||
#TRO07.stInVario.Settings.xJamSenDelayActive := TRUE;
|
||||
#TRO07.stInVario.Settings.tJamSenDelay := T#2s;
|
||||
#TRO07.stInVario.stSenCarrInPos := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
#TRO07.stInVario.stSenFinger := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
#TRO07.stInVario.stSenLastPos := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
#TRO07.stInVario.stSenJam := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
|
||||
#TRO07.stInPriorityManager.xReleaseOk := TRUE;
|
||||
#TRO07.stInSettings.xIsBorner := TRUE; // TODO(E-Planung) - pruefen - Bedeutung mit SPS klaeren
|
||||
|
||||
#TRO07(nInMainTroNo := "cMainTro____", // TODO(E-Planung)
|
||||
xInSftyOk := "DB_InterfaceSafety".stFromSafety.EStopMain.Q, // TODO(E-Planung)
|
||||
xInAllRdyToStart := TRUE,
|
||||
xInRelease := "DB_TRO_TEST".TRO07,
|
||||
xInMotorProtection := "FC____", // TODO(E-Planung)
|
||||
xInAutomatic := #t_automatik,
|
||||
stInOutMachineState := #stInOutControlUnitCabinet,
|
||||
xInAllRdyToStart := TRUE,
|
||||
xInReset := "cTodoFalse",
|
||||
xInErrorQuit := "SF____", // TODO(E-Planung) - Quittierung
|
||||
xInAutomatic := #t_automatik, // TODO(E-Planung) - Automatik des Schaltschranks
|
||||
xInRelease := "DB_TRO_TEST".TRO07,
|
||||
arInOutJamEntr := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich von TRO06
|
||||
stInOutJamEntr := "DB_JamArea____".stJam____.stData, // TODO(E-Planung)
|
||||
arInOutJamFinger := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich nach TRO08
|
||||
stInOutJamFinger := "DB_JamArea____".stJam____.stData, // TODO(E-Planung)
|
||||
stInOutMachineState := #stInOutControlUnitCabinet, // TODO(E-Planung) - Schaltschrank
|
||||
stInOutCognexInterface := #stCognexInterfaceDummy,
|
||||
arInOutJamEntr1 := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich von TRO06
|
||||
stInOutJamEntr1 := "DB_JamArea____".stJam____.stData,
|
||||
arInOutJamExit2 := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich nach TRO08
|
||||
stInOutJamExit2 := "DB_JamArea____".stJam____.stData,
|
||||
xOutStopper1 => "MB____", // TODO(E-Planung)
|
||||
xOutVarioMotor => "MA____", // TODO(E-Planung)
|
||||
stInOutHMI := "DB_Interface_HMI".stTRO.TRO07,
|
||||
nOutStateLast => "DB_GLOB_TroState".arTroState["cMainTro____"]); // TODO(E-Planung)
|
||||
nOutStateLast => "DB_GLOB_TroState".arTroState["cMainTro____"], // TODO(E-Planung)
|
||||
xOutStopper => "MB____", // TODO(E-Planung)
|
||||
xOutVarioMotor => "MA____"); // TODO(E-Planung)
|
||||
|
||||
END_REGION
|
||||
|
||||
REGION TRO09 (1Sep1Swi) Sep 0012
|
||||
@@ -416,52 +450,64 @@ REGION TRO04 (Vario) Sep 0027
|
||||
// Vorgaenger: TRO03
|
||||
// Nachfolger: TRO05
|
||||
// Einstufung: hoch
|
||||
// Aufbau nach Template FB_ILS_MTRO_Vario.scl.j2 (Referenz: doc/TRO_Katalog/scl_templates)
|
||||
|
||||
// Separator 1 = Bauteil 0027 aus dem Layout
|
||||
#TRO04.stInSeparator1.Settings.nSeparatorNo := "cSep_____"; // TODO(E-Planung)
|
||||
#TRO04.stInSeparator1.Settings.nSeparatorNo := "cSep_____"; // TODO(E-Planung)
|
||||
#TRO04.stInSeparator1.Settings.tDelayToNextItem := "TimeForSepWaiting_Short";
|
||||
#TRO04.stInSeparator1.Settings.tTrailingTime := t#600ms; // TODO(E-Planung): pruefen
|
||||
#TRO04.stInSeparator1.Settings.tHandlingTime := t#200ms; // TODO(E-Planung): pruefen
|
||||
#TRO04.stInSeparator1.Settings.tTrailingTime := t#800ms; // TODO(E-Planung): pruefen
|
||||
#TRO04.stInSeparator1.Settings.tHandlingTime := t#300ms; // TODO(E-Planung): pruefen
|
||||
#TRO04.stInSeparator1.Settings.tJam := "TimeForSepJam";
|
||||
#TRO04.stInSeparator1.Settings.xPluggedJam := TRUE;
|
||||
#TRO04.stInSeparator1.Settings.xPluggedJam := FALSE;
|
||||
#TRO04.stInSeparator1.Settings.xPluggedPart := FALSE;
|
||||
#TRO04.stInSeparator1.Settings.xPluggedScanner := FALSE;
|
||||
#TRO04.stInSeparator1.stSenInSep := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
#TRO04.stInSeparator1.Settings.tSenFree := T#1500ms; // TODO(E-Planung): pruefen
|
||||
#TRO04.stInSeparator1.Settings.tSenWait := T#4000ms; // TODO(E-Planung): pruefen
|
||||
|
||||
#TRO04.stInSeparator1.Settings.tSenFree := t#2000ms; // TODO(E-Planung): pruefen
|
||||
#TRO04.stInSeparator1.Settings.tSenWait := T#5000ms; // TODO(E-Planung): pruefen
|
||||
|
||||
#TRO04.stInVario.Settings.xContinousEmptying := FALSE;
|
||||
#TRO04.stInVario.Settings.tWaitForJog := T#300ms; // TODO(E-Planung): pruefen
|
||||
#TRO04.stInVario.Settings.tConvEmpty := T#45000ms; // TODO(E-Planung): pruefen
|
||||
#TRO04.stInVario.Settings.nCountCarrier := 1; // TODO(E-Planung): pruefen
|
||||
#TRO04.stInVario.Settings.tWaitForJog := T#300ms; // TODO(E-Planung): pruefen
|
||||
#TRO04.stInVario.Settings.tConvEmpty := T#45000ms; // TODO(E-Planung): pruefen
|
||||
#TRO04.stInVario.Settings.nCountCarrier := 1; // TODO(E-Planung): pruefen
|
||||
#TRO04.stInVario.Settings.tWaitForStop := t#3s;
|
||||
|
||||
#TRO04.stInVario.Settings.tCarrierInPosDelay := t#1200ms;
|
||||
#TRO04.stInVario.Settings.tCarrierInPosEdgeDelay := t#100ms;
|
||||
|
||||
#TRO04.stInVario.Settings.tRasterHigh := t#5s; // TODO(E-Planung): pruefen
|
||||
#TRO04.stInVario.Settings.tRasterLow := t#5s; // TODO(E-Planung): pruefen
|
||||
|
||||
#TRO04.stInVario.stSenCarrInPos := "DB_Inputs".Sensors["cInBG____"]; // MT in Pos - TODO(E-Planung)
|
||||
#TRO04.stInVario.stSenFinger := "DB_Inputs".Sensors["cInBG____"]; // Pusher Dog in Pos - TODO(E-Planung)
|
||||
#TRO04.stInVario.stSenLastPos := "DB_Inputs".Sensors["cInBG____"]; // Conveyor full - TODO(E-Planung)
|
||||
#TRO04.stInVario.stSenJam := "DB_Inputs".Sensors["cInBG____"]; // Jam detector - TODO(E-Planung)
|
||||
|
||||
#TRO04.stInPriorityManager.xReleaseOk := TRUE; // braucht keine Vorfahrtsregelung
|
||||
#TRO04.stInVario.Settings.xJamSenDelayActive := TRUE;
|
||||
#TRO04.stInVario.Settings.tJamSenDelay := T#2s;
|
||||
#TRO04.stInVario.stSenCarrInPos := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
#TRO04.stInVario.stSenFinger := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
#TRO04.stInVario.stSenLastPos := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
#TRO04.stInVario.stSenJam := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
|
||||
#TRO04.stInPriorityManager.xReleaseOk := TRUE;
|
||||
#TRO04.stInSettings.xIsBorner := TRUE; // TODO(E-Planung) - pruefen - Bedeutung mit SPS klaeren
|
||||
|
||||
#TRO04(nInMainTroNo := "cMainTro____", // TODO(E-Planung)
|
||||
xInSftyOk := "DB_InterfaceSafety".stFromSafety.EStopMain.Q, // TODO(E-Planung)
|
||||
xInAllRdyToStart := TRUE,
|
||||
xInRelease := "DB_TRO_TEST".TRO04,
|
||||
xInMotorProtection := "FC____", // TODO(E-Planung)
|
||||
xInAutomatic := #t_automatik,
|
||||
stInOutMachineState := #stInOutControlUnitCabinet,
|
||||
xInAllRdyToStart := TRUE,
|
||||
xInReset := "cTodoFalse",
|
||||
xInErrorQuit := "SF____", // TODO(E-Planung) - Quittierung
|
||||
xInAutomatic := #t_automatik, // TODO(E-Planung) - Automatik des Schaltschranks
|
||||
xInRelease := "DB_TRO_TEST".TRO04,
|
||||
arInOutJamEntr := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich von TRO03
|
||||
stInOutJamEntr := "DB_JamArea____".stJam____.stData, // TODO(E-Planung)
|
||||
arInOutJamFinger := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich nach TRO05
|
||||
stInOutJamFinger := "DB_JamArea____".stJam____.stData, // TODO(E-Planung)
|
||||
stInOutMachineState := #stInOutControlUnitCabinet, // TODO(E-Planung) - Schaltschrank
|
||||
stInOutCognexInterface := #stCognexInterfaceDummy,
|
||||
arInOutJamEntr1 := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich von TRO03
|
||||
stInOutJamEntr1 := "DB_JamArea____".stJam____.stData,
|
||||
arInOutJamExit2 := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich nach TRO05
|
||||
stInOutJamExit2 := "DB_JamArea____".stJam____.stData,
|
||||
xOutStopper1 => "MB____", // TODO(E-Planung)
|
||||
xOutVarioMotor => "MA____", // TODO(E-Planung)
|
||||
stInOutHMI := "DB_Interface_HMI".stTRO.TRO04,
|
||||
nOutStateLast => "DB_GLOB_TroState".arTroState["cMainTro____"]); // TODO(E-Planung)
|
||||
nOutStateLast => "DB_GLOB_TroState".arTroState["cMainTro____"], // TODO(E-Planung)
|
||||
xOutStopper => "MB____", // TODO(E-Planung)
|
||||
xOutVarioMotor => "MA____"); // TODO(E-Planung)
|
||||
|
||||
END_REGION
|
||||
|
||||
REGION TRO08 (1Sep) Sep 0032
|
||||
@@ -469,9 +515,10 @@ REGION TRO08 (1Sep) Sep 0032
|
||||
// Vorgaenger: TRO07
|
||||
// Nachfolger: TRO09
|
||||
// Einstufung: mittel
|
||||
// Aufbau nach Template FB_ILS_MTRO_1Sep.scl.j2 (Referenz: doc/TRO_Katalog/scl_templates)
|
||||
|
||||
// Separator 1 = Bauteil 0032 aus dem Layout
|
||||
#TRO08.stInSeparator1.Settings.nSeparatorNo := "cSep_____"; // TODO(E-Planung)
|
||||
#TRO08.stInSeparator1.Settings.nSeparatorNo := "cSep_____"; // TODO(E-Planung)
|
||||
#TRO08.stInSeparator1.Settings.tDelayToNextItem := "TimeForSepWaiting_Short";
|
||||
#TRO08.stInSeparator1.Settings.tTrailingTime := t#600ms; // TODO(E-Planung): pruefen
|
||||
#TRO08.stInSeparator1.Settings.tHandlingTime := t#200ms; // TODO(E-Planung): pruefen
|
||||
@@ -480,24 +527,28 @@ REGION TRO08 (1Sep) Sep 0032
|
||||
#TRO08.stInSeparator1.Settings.xPluggedPart := FALSE;
|
||||
#TRO08.stInSeparator1.Settings.xPluggedScanner := FALSE;
|
||||
#TRO08.stInSeparator1.stSenInSep := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
#TRO08.stInSeparator1.Settings.tSenFree := T#1500ms; // TODO(E-Planung): pruefen
|
||||
#TRO08.stInSeparator1.Settings.tSenWait := T#4000ms; // TODO(E-Planung): pruefen
|
||||
#TRO08.stInSenJam2 := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
|
||||
#TRO08.stInPriorityManager.xReleaseOk := TRUE;
|
||||
#TRO08.stInSeparator1.Settings.tSenFree := T#1500ms; // TODO(E-Planung): pruefen
|
||||
#TRO08.stInSeparator1.Settings.tSenWait := T#4000ms; // TODO(E-Planung): pruefen
|
||||
|
||||
#TRO08.stInPriorityManager.xReleaseOk := TRUE; // braucht keine Vorfahrtsregelung
|
||||
|
||||
#TRO08(nInMainTroNo := "cMainTro____", // TODO(E-Planung)
|
||||
xInSftyOk := "DB_InterfaceSafety".stFromSafety.EStopMain.Q, // TODO(E-Planung)
|
||||
xInAllRdyToStart := TRUE,
|
||||
xInCarouselRun := #fbCarousel____.xOutConveyorFullSpeed, // TODO(E-Planung) - nur am Kreisel, sonst Zeile loeschen
|
||||
xInRelease := "DB_TRO_TEST".TRO08,
|
||||
stInOutMachineState := #stInOutControlUnitCabinet,
|
||||
stInOutMachineState := #stInOutControlUnitCabinet, // TODO(E-Planung) - Schaltschrank
|
||||
stInOutCognexInterface := #stCognexInterfaceDummy,
|
||||
arInOutJamEntr1 := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich von TRO07
|
||||
stInOutJamEntr1 := "DB_JamArea____".stJam____.stData,
|
||||
stInOutJamEntr1 := "DB_JamArea____".stJam____.stData, // TODO(E-Planung)
|
||||
arInOutJamExit2 := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich nach TRO09
|
||||
stInOutJamExit2 := "DB_JamArea____".stJam____.stData,
|
||||
stInOutJamExit2 := "DB_JamArea____".stJam____.stData, // TODO(E-Planung)
|
||||
xOutStopper1 => "MB____", // TODO(E-Planung)
|
||||
stInOutHMI := "DB_Interface_HMI".stTRO.TRO08,
|
||||
nOutStateLast => "DB_GLOB_TroState".arTroState["cMainTro____"]); // TODO(E-Planung)
|
||||
nOutStateLast => "DB_GLOB_TroState".arTroState["cMainTro____"], // TODO(E-Planung)
|
||||
stInOutHMI := "DB_Interface_HMI".stTRO.TRO08);
|
||||
|
||||
END_REGION
|
||||
|
||||
REGION TRO10 (Vario) Sep 0035
|
||||
@@ -505,52 +556,64 @@ REGION TRO10 (Vario) Sep 0035
|
||||
// Vorgaenger: TRO09
|
||||
// Nachfolger: TRO11
|
||||
// Einstufung: hoch
|
||||
// Aufbau nach Template FB_ILS_MTRO_Vario.scl.j2 (Referenz: doc/TRO_Katalog/scl_templates)
|
||||
|
||||
// Separator 1 = Bauteil 0035 aus dem Layout
|
||||
#TRO10.stInSeparator1.Settings.nSeparatorNo := "cSep_____"; // TODO(E-Planung)
|
||||
#TRO10.stInSeparator1.Settings.nSeparatorNo := "cSep_____"; // TODO(E-Planung)
|
||||
#TRO10.stInSeparator1.Settings.tDelayToNextItem := "TimeForSepWaiting_Short";
|
||||
#TRO10.stInSeparator1.Settings.tTrailingTime := t#600ms; // TODO(E-Planung): pruefen
|
||||
#TRO10.stInSeparator1.Settings.tHandlingTime := t#200ms; // TODO(E-Planung): pruefen
|
||||
#TRO10.stInSeparator1.Settings.tTrailingTime := t#800ms; // TODO(E-Planung): pruefen
|
||||
#TRO10.stInSeparator1.Settings.tHandlingTime := t#300ms; // TODO(E-Planung): pruefen
|
||||
#TRO10.stInSeparator1.Settings.tJam := "TimeForSepJam";
|
||||
#TRO10.stInSeparator1.Settings.xPluggedJam := TRUE;
|
||||
#TRO10.stInSeparator1.Settings.xPluggedJam := FALSE;
|
||||
#TRO10.stInSeparator1.Settings.xPluggedPart := FALSE;
|
||||
#TRO10.stInSeparator1.Settings.xPluggedScanner := FALSE;
|
||||
#TRO10.stInSeparator1.stSenInSep := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
#TRO10.stInSeparator1.Settings.tSenFree := T#1500ms; // TODO(E-Planung): pruefen
|
||||
#TRO10.stInSeparator1.Settings.tSenWait := T#4000ms; // TODO(E-Planung): pruefen
|
||||
|
||||
#TRO10.stInSeparator1.Settings.tSenFree := t#2000ms; // TODO(E-Planung): pruefen
|
||||
#TRO10.stInSeparator1.Settings.tSenWait := T#5000ms; // TODO(E-Planung): pruefen
|
||||
|
||||
#TRO10.stInVario.Settings.xContinousEmptying := FALSE;
|
||||
#TRO10.stInVario.Settings.tWaitForJog := T#300ms; // TODO(E-Planung): pruefen
|
||||
#TRO10.stInVario.Settings.tConvEmpty := T#45000ms; // TODO(E-Planung): pruefen
|
||||
#TRO10.stInVario.Settings.nCountCarrier := 1; // TODO(E-Planung): pruefen
|
||||
#TRO10.stInVario.Settings.tWaitForJog := T#300ms; // TODO(E-Planung): pruefen
|
||||
#TRO10.stInVario.Settings.tConvEmpty := T#45000ms; // TODO(E-Planung): pruefen
|
||||
#TRO10.stInVario.Settings.nCountCarrier := 1; // TODO(E-Planung): pruefen
|
||||
#TRO10.stInVario.Settings.tWaitForStop := t#3s;
|
||||
|
||||
#TRO10.stInVario.Settings.tCarrierInPosDelay := t#1200ms;
|
||||
#TRO10.stInVario.Settings.tCarrierInPosEdgeDelay := t#100ms;
|
||||
|
||||
#TRO10.stInVario.Settings.tRasterHigh := t#5s; // TODO(E-Planung): pruefen
|
||||
#TRO10.stInVario.Settings.tRasterLow := t#5s; // TODO(E-Planung): pruefen
|
||||
|
||||
#TRO10.stInVario.stSenCarrInPos := "DB_Inputs".Sensors["cInBG____"]; // MT in Pos - TODO(E-Planung)
|
||||
#TRO10.stInVario.stSenFinger := "DB_Inputs".Sensors["cInBG____"]; // Pusher Dog in Pos - TODO(E-Planung)
|
||||
#TRO10.stInVario.stSenLastPos := "DB_Inputs".Sensors["cInBG____"]; // Conveyor full - TODO(E-Planung)
|
||||
#TRO10.stInVario.stSenJam := "DB_Inputs".Sensors["cInBG____"]; // Jam detector - TODO(E-Planung)
|
||||
|
||||
#TRO10.stInPriorityManager.xReleaseOk := TRUE; // braucht keine Vorfahrtsregelung
|
||||
#TRO10.stInVario.Settings.xJamSenDelayActive := TRUE;
|
||||
#TRO10.stInVario.Settings.tJamSenDelay := T#2s;
|
||||
#TRO10.stInVario.stSenCarrInPos := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
#TRO10.stInVario.stSenFinger := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
#TRO10.stInVario.stSenLastPos := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
#TRO10.stInVario.stSenJam := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
|
||||
#TRO10.stInPriorityManager.xReleaseOk := TRUE;
|
||||
#TRO10.stInSettings.xIsBorner := TRUE; // TODO(E-Planung) - pruefen - Bedeutung mit SPS klaeren
|
||||
|
||||
#TRO10(nInMainTroNo := "cMainTro____", // TODO(E-Planung)
|
||||
xInSftyOk := "DB_InterfaceSafety".stFromSafety.EStopMain.Q, // TODO(E-Planung)
|
||||
xInAllRdyToStart := TRUE,
|
||||
xInRelease := "DB_TRO_TEST".TRO10,
|
||||
xInMotorProtection := "FC____", // TODO(E-Planung)
|
||||
xInAutomatic := #t_automatik,
|
||||
stInOutMachineState := #stInOutControlUnitCabinet,
|
||||
xInAllRdyToStart := TRUE,
|
||||
xInReset := "cTodoFalse",
|
||||
xInErrorQuit := "SF____", // TODO(E-Planung) - Quittierung
|
||||
xInAutomatic := #t_automatik, // TODO(E-Planung) - Automatik des Schaltschranks
|
||||
xInRelease := "DB_TRO_TEST".TRO10,
|
||||
arInOutJamEntr := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich von TRO09
|
||||
stInOutJamEntr := "DB_JamArea____".stJam____.stData, // TODO(E-Planung)
|
||||
arInOutJamFinger := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich nach TRO11
|
||||
stInOutJamFinger := "DB_JamArea____".stJam____.stData, // TODO(E-Planung)
|
||||
stInOutMachineState := #stInOutControlUnitCabinet, // TODO(E-Planung) - Schaltschrank
|
||||
stInOutCognexInterface := #stCognexInterfaceDummy,
|
||||
arInOutJamEntr1 := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich von TRO09
|
||||
stInOutJamEntr1 := "DB_JamArea____".stJam____.stData,
|
||||
arInOutJamExit2 := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich nach TRO11
|
||||
stInOutJamExit2 := "DB_JamArea____".stJam____.stData,
|
||||
xOutStopper1 => "MB____", // TODO(E-Planung)
|
||||
xOutVarioMotor => "MA____", // TODO(E-Planung)
|
||||
stInOutHMI := "DB_Interface_HMI".stTRO.TRO10,
|
||||
nOutStateLast => "DB_GLOB_TroState".arTroState["cMainTro____"]); // TODO(E-Planung)
|
||||
nOutStateLast => "DB_GLOB_TroState".arTroState["cMainTro____"], // TODO(E-Planung)
|
||||
xOutStopper => "MB____", // TODO(E-Planung)
|
||||
xOutVarioMotor => "MA____"); // TODO(E-Planung)
|
||||
|
||||
END_REGION
|
||||
|
||||
REGION TRO12 (1Sep1Swi) Sep 0014
|
||||
@@ -619,9 +682,10 @@ REGION TRO05 (1Sep) Sep 0028
|
||||
// Vorgaenger: TRO04
|
||||
// Nachfolger: TRO06
|
||||
// Einstufung: mittel
|
||||
// Aufbau nach Template FB_ILS_MTRO_1Sep.scl.j2 (Referenz: doc/TRO_Katalog/scl_templates)
|
||||
|
||||
// Separator 1 = Bauteil 0028 aus dem Layout
|
||||
#TRO05.stInSeparator1.Settings.nSeparatorNo := "cSep_____"; // TODO(E-Planung)
|
||||
#TRO05.stInSeparator1.Settings.nSeparatorNo := "cSep_____"; // TODO(E-Planung)
|
||||
#TRO05.stInSeparator1.Settings.tDelayToNextItem := "TimeForSepWaiting_Short";
|
||||
#TRO05.stInSeparator1.Settings.tTrailingTime := t#600ms; // TODO(E-Planung): pruefen
|
||||
#TRO05.stInSeparator1.Settings.tHandlingTime := t#200ms; // TODO(E-Planung): pruefen
|
||||
@@ -630,24 +694,28 @@ REGION TRO05 (1Sep) Sep 0028
|
||||
#TRO05.stInSeparator1.Settings.xPluggedPart := FALSE;
|
||||
#TRO05.stInSeparator1.Settings.xPluggedScanner := FALSE;
|
||||
#TRO05.stInSeparator1.stSenInSep := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
#TRO05.stInSeparator1.Settings.tSenFree := T#1500ms; // TODO(E-Planung): pruefen
|
||||
#TRO05.stInSeparator1.Settings.tSenWait := T#4000ms; // TODO(E-Planung): pruefen
|
||||
#TRO05.stInSenJam2 := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
|
||||
#TRO05.stInPriorityManager.xReleaseOk := TRUE;
|
||||
#TRO05.stInSeparator1.Settings.tSenFree := T#1500ms; // TODO(E-Planung): pruefen
|
||||
#TRO05.stInSeparator1.Settings.tSenWait := T#4000ms; // TODO(E-Planung): pruefen
|
||||
|
||||
#TRO05.stInPriorityManager.xReleaseOk := TRUE; // braucht keine Vorfahrtsregelung
|
||||
|
||||
#TRO05(nInMainTroNo := "cMainTro____", // TODO(E-Planung)
|
||||
xInSftyOk := "DB_InterfaceSafety".stFromSafety.EStopMain.Q, // TODO(E-Planung)
|
||||
xInAllRdyToStart := TRUE,
|
||||
xInCarouselRun := #fbCarousel____.xOutConveyorFullSpeed, // TODO(E-Planung) - nur am Kreisel, sonst Zeile loeschen
|
||||
xInRelease := "DB_TRO_TEST".TRO05,
|
||||
stInOutMachineState := #stInOutControlUnitCabinet,
|
||||
stInOutMachineState := #stInOutControlUnitCabinet, // TODO(E-Planung) - Schaltschrank
|
||||
stInOutCognexInterface := #stCognexInterfaceDummy,
|
||||
arInOutJamEntr1 := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich von TRO04
|
||||
stInOutJamEntr1 := "DB_JamArea____".stJam____.stData,
|
||||
stInOutJamEntr1 := "DB_JamArea____".stJam____.stData, // TODO(E-Planung)
|
||||
arInOutJamExit2 := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich nach TRO06
|
||||
stInOutJamExit2 := "DB_JamArea____".stJam____.stData,
|
||||
stInOutJamExit2 := "DB_JamArea____".stJam____.stData, // TODO(E-Planung)
|
||||
xOutStopper1 => "MB____", // TODO(E-Planung)
|
||||
stInOutHMI := "DB_Interface_HMI".stTRO.TRO05,
|
||||
nOutStateLast => "DB_GLOB_TroState".arTroState["cMainTro____"]); // TODO(E-Planung)
|
||||
nOutStateLast => "DB_GLOB_TroState".arTroState["cMainTro____"], // TODO(E-Planung)
|
||||
stInOutHMI := "DB_Interface_HMI".stTRO.TRO05);
|
||||
|
||||
END_REGION
|
||||
|
||||
REGION TRO11 (1Sep) Sep 0036
|
||||
@@ -655,9 +723,10 @@ REGION TRO11 (1Sep) Sep 0036
|
||||
// Vorgaenger: TRO10
|
||||
// Nachfolger: TRO12
|
||||
// Einstufung: mittel
|
||||
// Aufbau nach Template FB_ILS_MTRO_1Sep.scl.j2 (Referenz: doc/TRO_Katalog/scl_templates)
|
||||
|
||||
// Separator 1 = Bauteil 0036 aus dem Layout
|
||||
#TRO11.stInSeparator1.Settings.nSeparatorNo := "cSep_____"; // TODO(E-Planung)
|
||||
#TRO11.stInSeparator1.Settings.nSeparatorNo := "cSep_____"; // TODO(E-Planung)
|
||||
#TRO11.stInSeparator1.Settings.tDelayToNextItem := "TimeForSepWaiting_Short";
|
||||
#TRO11.stInSeparator1.Settings.tTrailingTime := t#600ms; // TODO(E-Planung): pruefen
|
||||
#TRO11.stInSeparator1.Settings.tHandlingTime := t#200ms; // TODO(E-Planung): pruefen
|
||||
@@ -666,24 +735,28 @@ REGION TRO11 (1Sep) Sep 0036
|
||||
#TRO11.stInSeparator1.Settings.xPluggedPart := FALSE;
|
||||
#TRO11.stInSeparator1.Settings.xPluggedScanner := FALSE;
|
||||
#TRO11.stInSeparator1.stSenInSep := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
#TRO11.stInSeparator1.Settings.tSenFree := T#1500ms; // TODO(E-Planung): pruefen
|
||||
#TRO11.stInSeparator1.Settings.tSenWait := T#4000ms; // TODO(E-Planung): pruefen
|
||||
#TRO11.stInSenJam2 := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
|
||||
#TRO11.stInPriorityManager.xReleaseOk := TRUE;
|
||||
#TRO11.stInSeparator1.Settings.tSenFree := T#1500ms; // TODO(E-Planung): pruefen
|
||||
#TRO11.stInSeparator1.Settings.tSenWait := T#4000ms; // TODO(E-Planung): pruefen
|
||||
|
||||
#TRO11.stInPriorityManager.xReleaseOk := TRUE; // braucht keine Vorfahrtsregelung
|
||||
|
||||
#TRO11(nInMainTroNo := "cMainTro____", // TODO(E-Planung)
|
||||
xInSftyOk := "DB_InterfaceSafety".stFromSafety.EStopMain.Q, // TODO(E-Planung)
|
||||
xInAllRdyToStart := TRUE,
|
||||
xInCarouselRun := #fbCarousel____.xOutConveyorFullSpeed, // TODO(E-Planung) - nur am Kreisel, sonst Zeile loeschen
|
||||
xInRelease := "DB_TRO_TEST".TRO11,
|
||||
stInOutMachineState := #stInOutControlUnitCabinet,
|
||||
stInOutMachineState := #stInOutControlUnitCabinet, // TODO(E-Planung) - Schaltschrank
|
||||
stInOutCognexInterface := #stCognexInterfaceDummy,
|
||||
arInOutJamEntr1 := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich von TRO10
|
||||
stInOutJamEntr1 := "DB_JamArea____".stJam____.stData,
|
||||
stInOutJamEntr1 := "DB_JamArea____".stJam____.stData, // TODO(E-Planung)
|
||||
arInOutJamExit2 := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich nach TRO12
|
||||
stInOutJamExit2 := "DB_JamArea____".stJam____.stData,
|
||||
stInOutJamExit2 := "DB_JamArea____".stJam____.stData, // TODO(E-Planung)
|
||||
xOutStopper1 => "MB____", // TODO(E-Planung)
|
||||
stInOutHMI := "DB_Interface_HMI".stTRO.TRO11,
|
||||
nOutStateLast => "DB_GLOB_TroState".arTroState["cMainTro____"]); // TODO(E-Planung)
|
||||
nOutStateLast => "DB_GLOB_TroState".arTroState["cMainTro____"], // TODO(E-Planung)
|
||||
stInOutHMI := "DB_Interface_HMI".stTRO.TRO11);
|
||||
|
||||
END_REGION
|
||||
|
||||
REGION TRO13 (Vario) Sep 0039
|
||||
@@ -691,52 +764,64 @@ REGION TRO13 (Vario) Sep 0039
|
||||
// Vorgaenger: TRO12
|
||||
// Nachfolger: TRO14
|
||||
// Einstufung: hoch
|
||||
// Aufbau nach Template FB_ILS_MTRO_Vario.scl.j2 (Referenz: doc/TRO_Katalog/scl_templates)
|
||||
|
||||
// Separator 1 = Bauteil 0039 aus dem Layout
|
||||
#TRO13.stInSeparator1.Settings.nSeparatorNo := "cSep_____"; // TODO(E-Planung)
|
||||
#TRO13.stInSeparator1.Settings.nSeparatorNo := "cSep_____"; // TODO(E-Planung)
|
||||
#TRO13.stInSeparator1.Settings.tDelayToNextItem := "TimeForSepWaiting_Short";
|
||||
#TRO13.stInSeparator1.Settings.tTrailingTime := t#600ms; // TODO(E-Planung): pruefen
|
||||
#TRO13.stInSeparator1.Settings.tHandlingTime := t#200ms; // TODO(E-Planung): pruefen
|
||||
#TRO13.stInSeparator1.Settings.tTrailingTime := t#800ms; // TODO(E-Planung): pruefen
|
||||
#TRO13.stInSeparator1.Settings.tHandlingTime := t#300ms; // TODO(E-Planung): pruefen
|
||||
#TRO13.stInSeparator1.Settings.tJam := "TimeForSepJam";
|
||||
#TRO13.stInSeparator1.Settings.xPluggedJam := TRUE;
|
||||
#TRO13.stInSeparator1.Settings.xPluggedJam := FALSE;
|
||||
#TRO13.stInSeparator1.Settings.xPluggedPart := FALSE;
|
||||
#TRO13.stInSeparator1.Settings.xPluggedScanner := FALSE;
|
||||
#TRO13.stInSeparator1.stSenInSep := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
#TRO13.stInSeparator1.Settings.tSenFree := T#1500ms; // TODO(E-Planung): pruefen
|
||||
#TRO13.stInSeparator1.Settings.tSenWait := T#4000ms; // TODO(E-Planung): pruefen
|
||||
|
||||
#TRO13.stInSeparator1.Settings.tSenFree := t#2000ms; // TODO(E-Planung): pruefen
|
||||
#TRO13.stInSeparator1.Settings.tSenWait := T#5000ms; // TODO(E-Planung): pruefen
|
||||
|
||||
#TRO13.stInVario.Settings.xContinousEmptying := FALSE;
|
||||
#TRO13.stInVario.Settings.tWaitForJog := T#300ms; // TODO(E-Planung): pruefen
|
||||
#TRO13.stInVario.Settings.tConvEmpty := T#45000ms; // TODO(E-Planung): pruefen
|
||||
#TRO13.stInVario.Settings.nCountCarrier := 1; // TODO(E-Planung): pruefen
|
||||
#TRO13.stInVario.Settings.tWaitForJog := T#300ms; // TODO(E-Planung): pruefen
|
||||
#TRO13.stInVario.Settings.tConvEmpty := T#45000ms; // TODO(E-Planung): pruefen
|
||||
#TRO13.stInVario.Settings.nCountCarrier := 1; // TODO(E-Planung): pruefen
|
||||
#TRO13.stInVario.Settings.tWaitForStop := t#3s;
|
||||
|
||||
#TRO13.stInVario.Settings.tCarrierInPosDelay := t#1200ms;
|
||||
#TRO13.stInVario.Settings.tCarrierInPosEdgeDelay := t#100ms;
|
||||
|
||||
#TRO13.stInVario.Settings.tRasterHigh := t#5s; // TODO(E-Planung): pruefen
|
||||
#TRO13.stInVario.Settings.tRasterLow := t#5s; // TODO(E-Planung): pruefen
|
||||
|
||||
#TRO13.stInVario.stSenCarrInPos := "DB_Inputs".Sensors["cInBG____"]; // MT in Pos - TODO(E-Planung)
|
||||
#TRO13.stInVario.stSenFinger := "DB_Inputs".Sensors["cInBG____"]; // Pusher Dog in Pos - TODO(E-Planung)
|
||||
#TRO13.stInVario.stSenLastPos := "DB_Inputs".Sensors["cInBG____"]; // Conveyor full - TODO(E-Planung)
|
||||
#TRO13.stInVario.stSenJam := "DB_Inputs".Sensors["cInBG____"]; // Jam detector - TODO(E-Planung)
|
||||
|
||||
#TRO13.stInPriorityManager.xReleaseOk := TRUE; // braucht keine Vorfahrtsregelung
|
||||
#TRO13.stInVario.Settings.xJamSenDelayActive := TRUE;
|
||||
#TRO13.stInVario.Settings.tJamSenDelay := T#2s;
|
||||
#TRO13.stInVario.stSenCarrInPos := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
#TRO13.stInVario.stSenFinger := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
#TRO13.stInVario.stSenLastPos := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
#TRO13.stInVario.stSenJam := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
|
||||
#TRO13.stInPriorityManager.xReleaseOk := TRUE;
|
||||
#TRO13.stInSettings.xIsBorner := TRUE; // TODO(E-Planung) - pruefen - Bedeutung mit SPS klaeren
|
||||
|
||||
#TRO13(nInMainTroNo := "cMainTro____", // TODO(E-Planung)
|
||||
xInSftyOk := "DB_InterfaceSafety".stFromSafety.EStopMain.Q, // TODO(E-Planung)
|
||||
xInAllRdyToStart := TRUE,
|
||||
xInRelease := "DB_TRO_TEST".TRO13,
|
||||
xInMotorProtection := "FC____", // TODO(E-Planung)
|
||||
xInAutomatic := #t_automatik,
|
||||
stInOutMachineState := #stInOutControlUnitCabinet,
|
||||
xInAllRdyToStart := TRUE,
|
||||
xInReset := "cTodoFalse",
|
||||
xInErrorQuit := "SF____", // TODO(E-Planung) - Quittierung
|
||||
xInAutomatic := #t_automatik, // TODO(E-Planung) - Automatik des Schaltschranks
|
||||
xInRelease := "DB_TRO_TEST".TRO13,
|
||||
arInOutJamEntr := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich von TRO12
|
||||
stInOutJamEntr := "DB_JamArea____".stJam____.stData, // TODO(E-Planung)
|
||||
arInOutJamFinger := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich nach TRO14
|
||||
stInOutJamFinger := "DB_JamArea____".stJam____.stData, // TODO(E-Planung)
|
||||
stInOutMachineState := #stInOutControlUnitCabinet, // TODO(E-Planung) - Schaltschrank
|
||||
stInOutCognexInterface := #stCognexInterfaceDummy,
|
||||
arInOutJamEntr1 := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich von TRO12
|
||||
stInOutJamEntr1 := "DB_JamArea____".stJam____.stData,
|
||||
arInOutJamExit2 := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich nach TRO14
|
||||
stInOutJamExit2 := "DB_JamArea____".stJam____.stData,
|
||||
xOutStopper1 => "MB____", // TODO(E-Planung)
|
||||
xOutVarioMotor => "MA____", // TODO(E-Planung)
|
||||
stInOutHMI := "DB_Interface_HMI".stTRO.TRO13,
|
||||
nOutStateLast => "DB_GLOB_TroState".arTroState["cMainTro____"]); // TODO(E-Planung)
|
||||
nOutStateLast => "DB_GLOB_TroState".arTroState["cMainTro____"], // TODO(E-Planung)
|
||||
xOutStopper => "MB____", // TODO(E-Planung)
|
||||
xOutVarioMotor => "MA____"); // TODO(E-Planung)
|
||||
|
||||
END_REGION
|
||||
|
||||
REGION TRO15 (1Sep1Swi) Sep 0016
|
||||
@@ -805,9 +890,10 @@ REGION TRO14 (1Sep) Sep 0040
|
||||
// Vorgaenger: TRO13
|
||||
// Nachfolger: TRO15
|
||||
// Einstufung: mittel
|
||||
// Aufbau nach Template FB_ILS_MTRO_1Sep.scl.j2 (Referenz: doc/TRO_Katalog/scl_templates)
|
||||
|
||||
// Separator 1 = Bauteil 0040 aus dem Layout
|
||||
#TRO14.stInSeparator1.Settings.nSeparatorNo := "cSep_____"; // TODO(E-Planung)
|
||||
#TRO14.stInSeparator1.Settings.nSeparatorNo := "cSep_____"; // TODO(E-Planung)
|
||||
#TRO14.stInSeparator1.Settings.tDelayToNextItem := "TimeForSepWaiting_Short";
|
||||
#TRO14.stInSeparator1.Settings.tTrailingTime := t#600ms; // TODO(E-Planung): pruefen
|
||||
#TRO14.stInSeparator1.Settings.tHandlingTime := t#200ms; // TODO(E-Planung): pruefen
|
||||
@@ -816,24 +902,28 @@ REGION TRO14 (1Sep) Sep 0040
|
||||
#TRO14.stInSeparator1.Settings.xPluggedPart := FALSE;
|
||||
#TRO14.stInSeparator1.Settings.xPluggedScanner := FALSE;
|
||||
#TRO14.stInSeparator1.stSenInSep := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
#TRO14.stInSeparator1.Settings.tSenFree := T#1500ms; // TODO(E-Planung): pruefen
|
||||
#TRO14.stInSeparator1.Settings.tSenWait := T#4000ms; // TODO(E-Planung): pruefen
|
||||
#TRO14.stInSenJam2 := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
|
||||
#TRO14.stInPriorityManager.xReleaseOk := TRUE;
|
||||
#TRO14.stInSeparator1.Settings.tSenFree := T#1500ms; // TODO(E-Planung): pruefen
|
||||
#TRO14.stInSeparator1.Settings.tSenWait := T#4000ms; // TODO(E-Planung): pruefen
|
||||
|
||||
#TRO14.stInPriorityManager.xReleaseOk := TRUE; // braucht keine Vorfahrtsregelung
|
||||
|
||||
#TRO14(nInMainTroNo := "cMainTro____", // TODO(E-Planung)
|
||||
xInSftyOk := "DB_InterfaceSafety".stFromSafety.EStopMain.Q, // TODO(E-Planung)
|
||||
xInAllRdyToStart := TRUE,
|
||||
xInCarouselRun := #fbCarousel____.xOutConveyorFullSpeed, // TODO(E-Planung) - nur am Kreisel, sonst Zeile loeschen
|
||||
xInRelease := "DB_TRO_TEST".TRO14,
|
||||
stInOutMachineState := #stInOutControlUnitCabinet,
|
||||
stInOutMachineState := #stInOutControlUnitCabinet, // TODO(E-Planung) - Schaltschrank
|
||||
stInOutCognexInterface := #stCognexInterfaceDummy,
|
||||
arInOutJamEntr1 := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich von TRO13
|
||||
stInOutJamEntr1 := "DB_JamArea____".stJam____.stData,
|
||||
stInOutJamEntr1 := "DB_JamArea____".stJam____.stData, // TODO(E-Planung)
|
||||
arInOutJamExit2 := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich nach TRO15
|
||||
stInOutJamExit2 := "DB_JamArea____".stJam____.stData,
|
||||
stInOutJamExit2 := "DB_JamArea____".stJam____.stData, // TODO(E-Planung)
|
||||
xOutStopper1 => "MB____", // TODO(E-Planung)
|
||||
stInOutHMI := "DB_Interface_HMI".stTRO.TRO14,
|
||||
nOutStateLast => "DB_GLOB_TroState".arTroState["cMainTro____"]); // TODO(E-Planung)
|
||||
nOutStateLast => "DB_GLOB_TroState".arTroState["cMainTro____"], // TODO(E-Planung)
|
||||
stInOutHMI := "DB_Interface_HMI".stTRO.TRO14);
|
||||
|
||||
END_REGION
|
||||
|
||||
REGION TRO16 (1Sep) Sep 0018
|
||||
@@ -841,9 +931,10 @@ REGION TRO16 (1Sep) Sep 0018
|
||||
// Vorgaenger: TRO15, TRO18
|
||||
// Nachfolger: TRO19
|
||||
// Einstufung: mittel
|
||||
// Aufbau nach Template FB_ILS_MTRO_1Sep.scl.j2 (Referenz: doc/TRO_Katalog/scl_templates)
|
||||
|
||||
// Separator 1 = Bauteil 0018 aus dem Layout
|
||||
#TRO16.stInSeparator1.Settings.nSeparatorNo := "cSep_____"; // TODO(E-Planung)
|
||||
#TRO16.stInSeparator1.Settings.nSeparatorNo := "cSep_____"; // TODO(E-Planung)
|
||||
#TRO16.stInSeparator1.Settings.tDelayToNextItem := "TimeForSepWaiting_Short";
|
||||
#TRO16.stInSeparator1.Settings.tTrailingTime := t#600ms; // TODO(E-Planung): pruefen
|
||||
#TRO16.stInSeparator1.Settings.tHandlingTime := t#200ms; // TODO(E-Planung): pruefen
|
||||
@@ -852,26 +943,30 @@ REGION TRO16 (1Sep) Sep 0018
|
||||
#TRO16.stInSeparator1.Settings.xPluggedPart := FALSE;
|
||||
#TRO16.stInSeparator1.Settings.xPluggedScanner := FALSE;
|
||||
#TRO16.stInSeparator1.stSenInSep := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
#TRO16.stInSeparator1.Settings.tSenFree := T#1500ms; // TODO(E-Planung): pruefen
|
||||
#TRO16.stInSeparator1.Settings.tSenWait := T#4000ms; // TODO(E-Planung): pruefen
|
||||
#TRO16.stInSenJam2 := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
|
||||
#TRO16.stInPriorityManager.xReleaseOk := TRUE;
|
||||
#TRO16.stInSeparator1.Settings.tSenFree := T#1500ms; // TODO(E-Planung): pruefen
|
||||
#TRO16.stInSeparator1.Settings.tSenWait := T#4000ms; // TODO(E-Planung): pruefen
|
||||
|
||||
#TRO16.stInPriorityManager.xReleaseOk := TRUE; // braucht keine Vorfahrtsregelung
|
||||
|
||||
#TRO16(nInMainTroNo := "cMainTro____", // TODO(E-Planung)
|
||||
xInSftyOk := "DB_InterfaceSafety".stFromSafety.EStopMain.Q, // TODO(E-Planung)
|
||||
xInAllRdyToStart := TRUE,
|
||||
xInCarouselRun := #fbCarousel____.xOutConveyorFullSpeed, // TODO(E-Planung) - nur am Kreisel, sonst Zeile loeschen
|
||||
xInRelease := "DB_TRO_TEST".TRO16,
|
||||
stInOutMachineState := #stInOutControlUnitCabinet,
|
||||
stInOutMachineState := #stInOutControlUnitCabinet, // TODO(E-Planung) - Schaltschrank
|
||||
stInOutCognexInterface := #stCognexInterfaceDummy,
|
||||
arInOutJamEntr1 := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich von TRO15
|
||||
stInOutJamEntr1 := "DB_JamArea____".stJam____.stData,
|
||||
stInOutJamEntr1 := "DB_JamArea____".stJam____.stData, // TODO(E-Planung)
|
||||
arInOutJamEntr2 := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich von TRO18
|
||||
stInOutJamEntr2 := "DB_JamArea____".stJam____.stData,
|
||||
stInOutJamEntr2 := "DB_JamArea____".stJam____.stData, // TODO(E-Planung)
|
||||
arInOutJamExit2 := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich nach TRO19
|
||||
stInOutJamExit2 := "DB_JamArea____".stJam____.stData,
|
||||
stInOutJamExit2 := "DB_JamArea____".stJam____.stData, // TODO(E-Planung)
|
||||
xOutStopper1 => "MB____", // TODO(E-Planung)
|
||||
stInOutHMI := "DB_Interface_HMI".stTRO.TRO16,
|
||||
nOutStateLast => "DB_GLOB_TroState".arTroState["cMainTro____"]); // TODO(E-Planung)
|
||||
nOutStateLast => "DB_GLOB_TroState".arTroState["cMainTro____"], // TODO(E-Planung)
|
||||
stInOutHMI := "DB_Interface_HMI".stTRO.TRO16);
|
||||
|
||||
END_REGION
|
||||
|
||||
REGION TRO17 (Vario) Sep 0043
|
||||
@@ -879,52 +974,64 @@ REGION TRO17 (Vario) Sep 0043
|
||||
// Vorgaenger: TRO15
|
||||
// Nachfolger: TRO18
|
||||
// Einstufung: hoch
|
||||
// Aufbau nach Template FB_ILS_MTRO_Vario.scl.j2 (Referenz: doc/TRO_Katalog/scl_templates)
|
||||
|
||||
// Separator 1 = Bauteil 0043 aus dem Layout
|
||||
#TRO17.stInSeparator1.Settings.nSeparatorNo := "cSep_____"; // TODO(E-Planung)
|
||||
#TRO17.stInSeparator1.Settings.nSeparatorNo := "cSep_____"; // TODO(E-Planung)
|
||||
#TRO17.stInSeparator1.Settings.tDelayToNextItem := "TimeForSepWaiting_Short";
|
||||
#TRO17.stInSeparator1.Settings.tTrailingTime := t#600ms; // TODO(E-Planung): pruefen
|
||||
#TRO17.stInSeparator1.Settings.tHandlingTime := t#200ms; // TODO(E-Planung): pruefen
|
||||
#TRO17.stInSeparator1.Settings.tTrailingTime := t#800ms; // TODO(E-Planung): pruefen
|
||||
#TRO17.stInSeparator1.Settings.tHandlingTime := t#300ms; // TODO(E-Planung): pruefen
|
||||
#TRO17.stInSeparator1.Settings.tJam := "TimeForSepJam";
|
||||
#TRO17.stInSeparator1.Settings.xPluggedJam := TRUE;
|
||||
#TRO17.stInSeparator1.Settings.xPluggedJam := FALSE;
|
||||
#TRO17.stInSeparator1.Settings.xPluggedPart := FALSE;
|
||||
#TRO17.stInSeparator1.Settings.xPluggedScanner := FALSE;
|
||||
#TRO17.stInSeparator1.stSenInSep := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
#TRO17.stInSeparator1.Settings.tSenFree := T#1500ms; // TODO(E-Planung): pruefen
|
||||
#TRO17.stInSeparator1.Settings.tSenWait := T#4000ms; // TODO(E-Planung): pruefen
|
||||
|
||||
#TRO17.stInSeparator1.Settings.tSenFree := t#2000ms; // TODO(E-Planung): pruefen
|
||||
#TRO17.stInSeparator1.Settings.tSenWait := T#5000ms; // TODO(E-Planung): pruefen
|
||||
|
||||
#TRO17.stInVario.Settings.xContinousEmptying := FALSE;
|
||||
#TRO17.stInVario.Settings.tWaitForJog := T#300ms; // TODO(E-Planung): pruefen
|
||||
#TRO17.stInVario.Settings.tConvEmpty := T#45000ms; // TODO(E-Planung): pruefen
|
||||
#TRO17.stInVario.Settings.nCountCarrier := 1; // TODO(E-Planung): pruefen
|
||||
#TRO17.stInVario.Settings.tWaitForJog := T#300ms; // TODO(E-Planung): pruefen
|
||||
#TRO17.stInVario.Settings.tConvEmpty := T#45000ms; // TODO(E-Planung): pruefen
|
||||
#TRO17.stInVario.Settings.nCountCarrier := 1; // TODO(E-Planung): pruefen
|
||||
#TRO17.stInVario.Settings.tWaitForStop := t#3s;
|
||||
|
||||
#TRO17.stInVario.Settings.tCarrierInPosDelay := t#1200ms;
|
||||
#TRO17.stInVario.Settings.tCarrierInPosEdgeDelay := t#100ms;
|
||||
|
||||
#TRO17.stInVario.Settings.tRasterHigh := t#5s; // TODO(E-Planung): pruefen
|
||||
#TRO17.stInVario.Settings.tRasterLow := t#5s; // TODO(E-Planung): pruefen
|
||||
|
||||
#TRO17.stInVario.stSenCarrInPos := "DB_Inputs".Sensors["cInBG____"]; // MT in Pos - TODO(E-Planung)
|
||||
#TRO17.stInVario.stSenFinger := "DB_Inputs".Sensors["cInBG____"]; // Pusher Dog in Pos - TODO(E-Planung)
|
||||
#TRO17.stInVario.stSenLastPos := "DB_Inputs".Sensors["cInBG____"]; // Conveyor full - TODO(E-Planung)
|
||||
#TRO17.stInVario.stSenJam := "DB_Inputs".Sensors["cInBG____"]; // Jam detector - TODO(E-Planung)
|
||||
|
||||
#TRO17.stInPriorityManager.xReleaseOk := TRUE; // braucht keine Vorfahrtsregelung
|
||||
#TRO17.stInVario.Settings.xJamSenDelayActive := TRUE;
|
||||
#TRO17.stInVario.Settings.tJamSenDelay := T#2s;
|
||||
#TRO17.stInVario.stSenCarrInPos := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
#TRO17.stInVario.stSenFinger := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
#TRO17.stInVario.stSenLastPos := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
#TRO17.stInVario.stSenJam := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
|
||||
#TRO17.stInPriorityManager.xReleaseOk := TRUE;
|
||||
#TRO17.stInSettings.xIsBorner := TRUE; // TODO(E-Planung) - pruefen - Bedeutung mit SPS klaeren
|
||||
|
||||
#TRO17(nInMainTroNo := "cMainTro____", // TODO(E-Planung)
|
||||
xInSftyOk := "DB_InterfaceSafety".stFromSafety.EStopMain.Q, // TODO(E-Planung)
|
||||
xInAllRdyToStart := TRUE,
|
||||
xInRelease := "DB_TRO_TEST".TRO17,
|
||||
xInMotorProtection := "FC____", // TODO(E-Planung)
|
||||
xInAutomatic := #t_automatik,
|
||||
stInOutMachineState := #stInOutControlUnitCabinet,
|
||||
xInAllRdyToStart := TRUE,
|
||||
xInReset := "cTodoFalse",
|
||||
xInErrorQuit := "SF____", // TODO(E-Planung) - Quittierung
|
||||
xInAutomatic := #t_automatik, // TODO(E-Planung) - Automatik des Schaltschranks
|
||||
xInRelease := "DB_TRO_TEST".TRO17,
|
||||
arInOutJamEntr := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich von TRO15
|
||||
stInOutJamEntr := "DB_JamArea____".stJam____.stData, // TODO(E-Planung)
|
||||
arInOutJamFinger := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich nach TRO18
|
||||
stInOutJamFinger := "DB_JamArea____".stJam____.stData, // TODO(E-Planung)
|
||||
stInOutMachineState := #stInOutControlUnitCabinet, // TODO(E-Planung) - Schaltschrank
|
||||
stInOutCognexInterface := #stCognexInterfaceDummy,
|
||||
arInOutJamEntr1 := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich von TRO15
|
||||
stInOutJamEntr1 := "DB_JamArea____".stJam____.stData,
|
||||
arInOutJamExit2 := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich nach TRO18
|
||||
stInOutJamExit2 := "DB_JamArea____".stJam____.stData,
|
||||
xOutStopper1 => "MB____", // TODO(E-Planung)
|
||||
xOutVarioMotor => "MA____", // TODO(E-Planung)
|
||||
stInOutHMI := "DB_Interface_HMI".stTRO.TRO17,
|
||||
nOutStateLast => "DB_GLOB_TroState".arTroState["cMainTro____"]); // TODO(E-Planung)
|
||||
nOutStateLast => "DB_GLOB_TroState".arTroState["cMainTro____"], // TODO(E-Planung)
|
||||
xOutStopper => "MB____", // TODO(E-Planung)
|
||||
xOutVarioMotor => "MA____"); // TODO(E-Planung)
|
||||
|
||||
END_REGION
|
||||
|
||||
REGION TRO19 (1Sep) Sep 0020
|
||||
@@ -932,9 +1039,10 @@ REGION TRO19 (1Sep) Sep 0020
|
||||
// Vorgaenger: TRO16
|
||||
// Nachfolger: SYS3, TRO20
|
||||
// Einstufung: mittel
|
||||
// Aufbau nach Template FB_ILS_MTRO_1Sep.scl.j2 (Referenz: doc/TRO_Katalog/scl_templates)
|
||||
|
||||
// Separator 1 = Bauteil 0020 aus dem Layout
|
||||
#TRO19.stInSeparator1.Settings.nSeparatorNo := "cSep_____"; // TODO(E-Planung)
|
||||
#TRO19.stInSeparator1.Settings.nSeparatorNo := "cSep_____"; // TODO(E-Planung)
|
||||
#TRO19.stInSeparator1.Settings.tDelayToNextItem := "TimeForSepWaiting_Short";
|
||||
#TRO19.stInSeparator1.Settings.tTrailingTime := t#600ms; // TODO(E-Planung): pruefen
|
||||
#TRO19.stInSeparator1.Settings.tHandlingTime := t#200ms; // TODO(E-Planung): pruefen
|
||||
@@ -943,26 +1051,31 @@ REGION TRO19 (1Sep) Sep 0020
|
||||
#TRO19.stInSeparator1.Settings.xPluggedPart := FALSE;
|
||||
#TRO19.stInSeparator1.Settings.xPluggedScanner := FALSE;
|
||||
#TRO19.stInSeparator1.stSenInSep := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
#TRO19.stInSeparator1.Settings.tSenFree := T#1500ms; // TODO(E-Planung): pruefen
|
||||
#TRO19.stInSeparator1.Settings.tSenWait := T#4000ms; // TODO(E-Planung): pruefen
|
||||
#TRO19.stInSenJam2 := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
#TRO19.stInSenJam3 := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
|
||||
#TRO19.stInPriorityManager.xReleaseOk := TRUE;
|
||||
#TRO19.stInSeparator1.Settings.tSenFree := T#1500ms; // TODO(E-Planung): pruefen
|
||||
#TRO19.stInSeparator1.Settings.tSenWait := T#4000ms; // TODO(E-Planung): pruefen
|
||||
|
||||
#TRO19.stInPriorityManager.xReleaseOk := TRUE; // braucht keine Vorfahrtsregelung
|
||||
|
||||
#TRO19(nInMainTroNo := "cMainTro____", // TODO(E-Planung)
|
||||
xInSftyOk := "DB_InterfaceSafety".stFromSafety.EStopMain.Q, // TODO(E-Planung)
|
||||
xInAllRdyToStart := TRUE,
|
||||
xInCarouselRun := #fbCarousel____.xOutConveyorFullSpeed, // TODO(E-Planung) - nur am Kreisel, sonst Zeile loeschen
|
||||
xInRelease := "DB_TRO_TEST".TRO19,
|
||||
stInOutMachineState := #stInOutControlUnitCabinet,
|
||||
stInOutMachineState := #stInOutControlUnitCabinet, // TODO(E-Planung) - Schaltschrank
|
||||
stInOutCognexInterface := #stCognexInterfaceDummy,
|
||||
arInOutJamEntr1 := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich von TRO16
|
||||
stInOutJamEntr1 := "DB_JamArea____".stJam____.stData,
|
||||
stInOutJamEntr1 := "DB_JamArea____".stJam____.stData, // TODO(E-Planung)
|
||||
arInOutJamExit2 := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich nach SYS3 (Station, kein TRO)
|
||||
stInOutJamExit2 := "DB_JamArea____".stJam____.stData,
|
||||
stInOutJamExit2 := "DB_JamArea____".stJam____.stData, // TODO(E-Planung)
|
||||
arInOutJamExit3 := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich nach TRO20
|
||||
stInOutJamExit3 := "DB_JamArea____".stJam____.stData,
|
||||
stInOutJamExit3 := "DB_JamArea____".stJam____.stData, // TODO(E-Planung)
|
||||
xOutStopper1 => "MB____", // TODO(E-Planung)
|
||||
stInOutHMI := "DB_Interface_HMI".stTRO.TRO19,
|
||||
nOutStateLast => "DB_GLOB_TroState".arTroState["cMainTro____"]); // TODO(E-Planung)
|
||||
nOutStateLast => "DB_GLOB_TroState".arTroState["cMainTro____"], // TODO(E-Planung)
|
||||
stInOutHMI := "DB_Interface_HMI".stTRO.TRO19);
|
||||
|
||||
END_REGION
|
||||
|
||||
REGION TRO18 (1Sep) Sep 0044
|
||||
@@ -970,9 +1083,10 @@ REGION TRO18 (1Sep) Sep 0044
|
||||
// Vorgaenger: TRO17
|
||||
// Nachfolger: TRO16
|
||||
// Einstufung: mittel
|
||||
// Aufbau nach Template FB_ILS_MTRO_1Sep.scl.j2 (Referenz: doc/TRO_Katalog/scl_templates)
|
||||
|
||||
// Separator 1 = Bauteil 0044 aus dem Layout
|
||||
#TRO18.stInSeparator1.Settings.nSeparatorNo := "cSep_____"; // TODO(E-Planung)
|
||||
#TRO18.stInSeparator1.Settings.nSeparatorNo := "cSep_____"; // TODO(E-Planung)
|
||||
#TRO18.stInSeparator1.Settings.tDelayToNextItem := "TimeForSepWaiting_Short";
|
||||
#TRO18.stInSeparator1.Settings.tTrailingTime := t#600ms; // TODO(E-Planung): pruefen
|
||||
#TRO18.stInSeparator1.Settings.tHandlingTime := t#200ms; // TODO(E-Planung): pruefen
|
||||
@@ -981,24 +1095,28 @@ REGION TRO18 (1Sep) Sep 0044
|
||||
#TRO18.stInSeparator1.Settings.xPluggedPart := FALSE;
|
||||
#TRO18.stInSeparator1.Settings.xPluggedScanner := FALSE;
|
||||
#TRO18.stInSeparator1.stSenInSep := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
#TRO18.stInSeparator1.Settings.tSenFree := T#1500ms; // TODO(E-Planung): pruefen
|
||||
#TRO18.stInSeparator1.Settings.tSenWait := T#4000ms; // TODO(E-Planung): pruefen
|
||||
#TRO18.stInSenJam2 := "DB_Inputs".Sensors["cInBG____"]; // TODO(E-Planung)
|
||||
|
||||
#TRO18.stInPriorityManager.xReleaseOk := TRUE;
|
||||
#TRO18.stInSeparator1.Settings.tSenFree := T#1500ms; // TODO(E-Planung): pruefen
|
||||
#TRO18.stInSeparator1.Settings.tSenWait := T#4000ms; // TODO(E-Planung): pruefen
|
||||
|
||||
#TRO18.stInPriorityManager.xReleaseOk := TRUE; // braucht keine Vorfahrtsregelung
|
||||
|
||||
#TRO18(nInMainTroNo := "cMainTro____", // TODO(E-Planung)
|
||||
xInSftyOk := "DB_InterfaceSafety".stFromSafety.EStopMain.Q, // TODO(E-Planung)
|
||||
xInAllRdyToStart := TRUE,
|
||||
xInCarouselRun := #fbCarousel____.xOutConveyorFullSpeed, // TODO(E-Planung) - nur am Kreisel, sonst Zeile loeschen
|
||||
xInRelease := "DB_TRO_TEST".TRO18,
|
||||
stInOutMachineState := #stInOutControlUnitCabinet,
|
||||
stInOutMachineState := #stInOutControlUnitCabinet, // TODO(E-Planung) - Schaltschrank
|
||||
stInOutCognexInterface := #stCognexInterfaceDummy,
|
||||
arInOutJamEntr1 := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich von TRO17
|
||||
stInOutJamEntr1 := "DB_JamArea____".stJam____.stData,
|
||||
stInOutJamEntr1 := "DB_JamArea____".stJam____.stData, // TODO(E-Planung)
|
||||
arInOutJamExit2 := "DB_JamArea____".stJam____.arCarrier, // TODO(E-Planung) - Staubereich nach TRO16
|
||||
stInOutJamExit2 := "DB_JamArea____".stJam____.stData,
|
||||
stInOutJamExit2 := "DB_JamArea____".stJam____.stData, // TODO(E-Planung)
|
||||
xOutStopper1 => "MB____", // TODO(E-Planung)
|
||||
stInOutHMI := "DB_Interface_HMI".stTRO.TRO18,
|
||||
nOutStateLast => "DB_GLOB_TroState".arTroState["cMainTro____"]); // TODO(E-Planung)
|
||||
nOutStateLast => "DB_GLOB_TroState".arTroState["cMainTro____"], // TODO(E-Planung)
|
||||
stInOutHMI := "DB_Interface_HMI".stTRO.TRO18);
|
||||
|
||||
END_REGION
|
||||
|
||||
END_FUNCTION_BLOCK
|
||||
|
||||
+599
-212
File diff suppressed because it is too large
Load Diff
+223
-4
@@ -36,6 +36,8 @@ def _normalisiert(text: str) -> list[str]:
|
||||
for zeile in text.splitlines():
|
||||
zeile = re.sub(r"//.*$", "", zeile) # Kommentar
|
||||
zeile = re.sub(r"\s+", " ", zeile).strip() # Leerraum
|
||||
# "a:=b" und "a := b" sind dasselbe SCL (Referenzen schreiben beides)
|
||||
zeile = re.sub(r"\s*(:=|=>)\s*", r" \1 ", zeile)
|
||||
if zeile:
|
||||
zeilen.append(zeile)
|
||||
return zeilen
|
||||
@@ -49,11 +51,26 @@ def _referenz_region(datei: str) -> list[str]:
|
||||
return _normalisiert("\n".join(zeilen[anfang:ende + 1]))
|
||||
|
||||
|
||||
def _jam(jam, db: str) -> None:
|
||||
"""Staubereich mit bekanntem DB (Traeger und Daten wie ueblich darin)."""
|
||||
jam.db = _name(db)
|
||||
jam.carriers = _name(f"{db}.arCarrier")
|
||||
jam.data = _name(f"{db}.stData")
|
||||
|
||||
|
||||
def _scanner(sc, interface: str, tag: str, hw_results: str) -> None:
|
||||
sc.interface = _name(interface)
|
||||
sc.tag = _name(tag)
|
||||
sc.hw_results = _name(hw_results)
|
||||
|
||||
|
||||
def _kontext(tro_id: str, type_name: str, vorgaenger: list[str],
|
||||
nachfolger: list[str]) -> SclTro:
|
||||
nachfolger: list[str], separators: list[str] | None = None,
|
||||
hosts: list[str] | None = None) -> SclTro:
|
||||
"""Kontext eines TRO mit der Topologie der Referenzstelle."""
|
||||
tro = DerivedTro(tro_id=tro_id, type_name=type_name, label=tro_id, hosts=[],
|
||||
separators=["0001"], scanners=[], reason="Referenz",
|
||||
tro = DerivedTro(tro_id=tro_id, type_name=type_name, label=tro_id,
|
||||
hosts=hosts or [], separators=separators or ["0001"],
|
||||
scanners=[], reason="Referenz",
|
||||
predecessors=vorgaenger, successors=nachfolger)
|
||||
document = TroDocument.from_analysis(Analysis(tros=[tro]), source="referenz")
|
||||
return build_context(document, "referenz").tros[0]
|
||||
@@ -105,6 +122,206 @@ def test_1sep1swi_wie_tro107(templates):
|
||||
_vergleich(ist, _referenz_region("FB_ILS_MTRO_1Sep1Swi.scl"))
|
||||
|
||||
|
||||
def test_1sep_wie_tro100(templates):
|
||||
"""FB_ILS_MTRO_1Sep gegen TRO 100 (=A01+UH01-KF00 FB_Main)."""
|
||||
t = _kontext("TRO100", "1Sep", ["TRO099"], ["TRO101"])
|
||||
t.region_title = "TRO 100 (1Sep)"
|
||||
sep = t.separators[0]
|
||||
sep.no = _name("cSep100.1")
|
||||
sep.sensor = _name("cInBG3242")
|
||||
sep.stopper = _name("MB3242")
|
||||
t.jam_exits[0].sensor = _name("cInBG3243")
|
||||
t.main_tro = _name("cMainTro100")
|
||||
t.safety = _name('"DB_InterfaceSafety".stFromSafety.EStopMainOF1.Q')
|
||||
t.carousel_run = _name("#fbCarousel0101.xOutConveyorFullSpeed")
|
||||
t.machine_state = _name("#stInOutControlUnitCabinetOF1")
|
||||
_jam(t.jam_entries[0], '"DB_JamArea0100".stJam0100_1')
|
||||
_jam(t.jam_exits[0], '"DB_JamArea0101".stJam0101_1')
|
||||
|
||||
ist = _normalisiert(templates.render(t))
|
||||
_vergleich(ist, _referenz_region("FB_ILS_MTRO_1Sep.scl"))
|
||||
|
||||
|
||||
def test_vario_wie_tro115(templates):
|
||||
"""FB_ILS_MTRO_Vario gegen TRO 115."""
|
||||
t = _kontext("TRO115", "Vario", ["TRO114"], ["TRO116"])
|
||||
t.region_title = "TRO 115 (Vario)"
|
||||
sep = t.separators[0]
|
||||
sep.no = _name("cSep115.1")
|
||||
sep.sensor = _name("cInBG3025")
|
||||
sep.stopper = _name("MB3025")
|
||||
for name, wert in (("stSenCarrInPos", "cInBG3026"), ("stSenFinger", "cInBG3027"),
|
||||
("stSenLastPos", "cInBG3000"), ("stSenJam", "cInBG3001")):
|
||||
t.vario_sensors[name] = _name(wert)
|
||||
t.is_border = _name("TRUE")
|
||||
t.main_tro = _name("cMainTro115")
|
||||
t.safety = _name('"DB_InterfaceSafety".stFromSafety.EStopMainOF1.Q')
|
||||
t.motor_protection = _name('"FC0145"')
|
||||
t.error_quit = _name('"SF0002"')
|
||||
t.automatic = _name('#t_Automatik_OF1 AND "SF0120"')
|
||||
_jam(t.jam_in, '"DB_JamArea4104".stJam4104_1')
|
||||
_jam(t.jam_out, '"DB_JamArea4103".stJam4103_1')
|
||||
t.machine_state = _name("#stInOutControlUnitCabinetOF1")
|
||||
t.vario_motor = _name("MA0145")
|
||||
|
||||
ist = _normalisiert(templates.render(t))
|
||||
_vergleich(ist, _referenz_region("FB_ILS_MTRO_Vario.scl"))
|
||||
|
||||
|
||||
def test_vario_workstation_wie_tro421(templates):
|
||||
"""FB_ILS_MTRO_Vario_workStation gegen die Aufrufstelle TRO 421 (UH04)."""
|
||||
t = _kontext("TRO421", "Vario_workStation", ["TRO420"], ["TRO422"])
|
||||
t.region_title = "TRO 421 (Vario)"
|
||||
sep = t.separators[0]
|
||||
sep.no = _name("cSep421.1")
|
||||
sep.sensor = _name("cInBG3326")
|
||||
sep.stopper = _name("MB3326")
|
||||
for name, wert in (("stSenFinger", "cInBG3315"), ("stSenLastPos", "cInBG3317"),
|
||||
("stSenCarrInPos", "cInBG3324"), ("stSenJam", "cInBG3320")):
|
||||
t.vario_sensors[name] = _name(wert)
|
||||
t.work_station.loaded_error_sensor = _name("cInBG3325")
|
||||
t.work_station.station_sensor = _name("cInBG3314")
|
||||
t.work_station.station_release = _name('#"rTrig_Workstation 1".CLK')
|
||||
t.main_tro = _name("cMainTro421")
|
||||
t.safety = _name('"DB_InterfaceSafety".stFromSafety.EStopMain.Q')
|
||||
t.automatic = _name("#t_automatik")
|
||||
t.release = '"DB_TRO_Test".TRO421'
|
||||
t.motor_protection = _name('"FC0062"')
|
||||
_jam(t.jam_in, '"DB_JamArea4004".stJam4004_2')
|
||||
_jam(t.jam_out, '"DB_JamArea4005".stJam4005_1')
|
||||
t.machine_state = _name("#stInOutControlUnitCabinet")
|
||||
t.vario_motor = _name("MA0062")
|
||||
|
||||
ist = _normalisiert(templates.render(t))
|
||||
_vergleich(ist, _referenz_region("FB_ILS_MTRO_Vario_workStation_CallSite.scl"))
|
||||
|
||||
|
||||
def test_1sep2swi_wie_tro267(templates):
|
||||
"""FB_ILS_MTRO_1Sep2Swi gegen TRO 267 (Scanner BX2100, 3 Abgaenge)."""
|
||||
t = _kontext("TRO267", "1Sep2Swi", ["TRO266"], ["TRO268", "TRO269", "TRO270"])
|
||||
t.region_title = "TRO 267 (1Sep2Switch)+Scanner(BX2100)"
|
||||
sep = t.separators[0]
|
||||
sep.no = _name("cSep267.1")
|
||||
sep.sensor = _name("cInBG4440")
|
||||
sep.part_sensor = _name("cInBG4465")
|
||||
sep.stopper = _name("MB4440")
|
||||
for jam, sensor in zip(t.jam_exits, ("cInBG4444", "cInBG4455", "cInBG4454")):
|
||||
jam.sensor = _name(sensor)
|
||||
for weiche, ventil in zip(t.switches, ("MB4444", "MB4455")):
|
||||
weiche.valve = _name(ventil)
|
||||
weiche.to1_destinations = 3 # Referenz: 3 je Weiche
|
||||
t.switches[0].no = _name("cSwi267.1")
|
||||
_scanner(t.scanners[0], "cScannerBX2100", "bx2100",
|
||||
"=A01+UC021-BX2100~Ergebnisse_–_64_Bytes_1")
|
||||
t.main_tro = _name("cMainTro267")
|
||||
t.safety = _name('"cTodoTRUE"')
|
||||
t.release = '"DB_TRO_Test".TRO267'
|
||||
t.carousel_run = _name("#fbCarousel1110.xOutConveyorFullSpeed")
|
||||
t.machine_state = _name("#stInOutControlUnitCabinetOF1")
|
||||
_jam(t.jam_entries[0], '"DB_JamArea1110".stJam1110_4')
|
||||
for jam, nr in zip(t.jam_exits[:2], ("5001", "5000")): # Uebergaben
|
||||
jam.carriers = _name(f"#arCarrierHandoverJam{nr}")
|
||||
jam.data = _name(f"#stJamDataHandoverJam{nr}")
|
||||
_jam(t.jam_exits[2], '"DB_JamArea1110".stJam1110_5')
|
||||
|
||||
ist = _normalisiert(templates.render(t))
|
||||
_vergleich(ist, _referenz_region("FB_ILS_MTRO_1Sep2Swi.scl"))
|
||||
|
||||
|
||||
def test_1sep_sscc_wie_tro105(templates):
|
||||
"""FB_ILS_MTRO_1Sep_SSCC gegen TRO 105 (Scanner BX1104, SSCC-Scanner BX1107)."""
|
||||
t = _kontext("TRO105", "1Sep_SSCC", ["TRO104"], ["TRO106"])
|
||||
t.region_title = "TRO 105 (1Sep)+Scanner"
|
||||
sep = t.separators[0]
|
||||
sep.no = _name("cSep105.1")
|
||||
sep.sensor = _name("cInBG3280")
|
||||
sep.stopper = _name("MB3280")
|
||||
t.jam_exits[0].sensor = _name("cInBG3281")
|
||||
_scanner(t.scanners[0], "cScannerBX1104", "bx1104",
|
||||
"BX1104~Ergebnisse_–_64_Bytes_1")
|
||||
_scanner(t.sscc.scanner, "#stCognexIntfTro105", "bx1107",
|
||||
"BX1107~Ergebnisse_–_64_Bytes_1")
|
||||
t.sscc.end_sensor = _name("cInBG3281")
|
||||
t.sscc.hmi = _name("SSCC1107")
|
||||
t.main_tro = _name("cMainTro105")
|
||||
t.safety = _name('"DB_InterfaceSafety".stFromSafety.EStopMainOF1.Q')
|
||||
t.carousel_run = _name("TRUE")
|
||||
t.release = ('"FB_CommunicationWCSBL_DB".fbTeleHandler.xOutConnectionActive '
|
||||
'OR "IBN".xFahrenOhneTcpPartner')
|
||||
t.machine_state = _name("#stInOutControlUnitCabinetOF1")
|
||||
_jam(t.jam_entries[0], '"DB_JamArea0104".stJam0104_3')
|
||||
_jam(t.jam_exits[0], '"DB_JamArea0106".stJam0106_2')
|
||||
t.correction_station = _name("0")
|
||||
|
||||
ist = _normalisiert(templates.render(t))
|
||||
_vergleich(ist, _referenz_region("FB_ILS_MTRO_1Sep_SSCC.scl"))
|
||||
|
||||
|
||||
def test_pinstore_auto_wie_tro208(templates):
|
||||
"""FB_ILS_MTRO_PinStore_Auto gegen BLOCK 1.1.1 (TRO 208).
|
||||
|
||||
Die Referenz hat 19 Linien, schreibt aber nur die Linien 1-3 aus (bei
|
||||
"Separator Store Out" nur Linie 1, "weitere analog"). Der Kontext hat
|
||||
deshalb 19 Linien; was die Referenz abkuerzt, wird vor dem Vergleich aus
|
||||
der Template-Ausgabe genommen.
|
||||
"""
|
||||
linien = [f"{n:04d}" for n in range(1, 20)]
|
||||
t = _kontext("TRO208", "PinStore_Auto", ["TRO207"], ["TRO209"],
|
||||
separators=linien, hosts=linien)
|
||||
t.region_title = "BLOCK 1.1.1 (TRO 208)"
|
||||
st = t.store
|
||||
st.encoder = _name("#fbEncoderGF2200")
|
||||
st.dest = _name("cDest11100")
|
||||
st.conv_stations = _name("cHooksSorterMaxPin111")
|
||||
st.stations_max = _name("cStationsMax111")
|
||||
st.threshold = _name("cNoPositionsBlock1")
|
||||
st.reference_sensor = _name("cInBG3001")
|
||||
st.station = _name("111")
|
||||
st.quit_local = _name('"SF0121" OR "SF0117"')
|
||||
st.test_target = _name('"IBN".nTestTarget111')
|
||||
st.run_in = _name("#fbSortConv1101.xOutConveyorFullSpeed")
|
||||
st.run_out = _name("#fbExitConv1103.xOutConveyorFullSpeed")
|
||||
st.db = _name('"DB_Storage1.1.1"')
|
||||
st.removal = _name('"DB_HandshakeStorage".Str_StorageRemoval.'
|
||||
'arrudt_StorageRemovalHandshakeTROsLvl1[1]')
|
||||
st.conv_db = _name('"DB_ConveyorStations".stConveyorStations111')
|
||||
st.pin_sensor = _name("cInBG3000")
|
||||
st.pin_stopper = _name("MB3000")
|
||||
for linie, (laenge, sensor, stau, stopper) in zip(st.lines, (
|
||||
("4", "cInBG3270", "cInBG3030", "MB3270"),
|
||||
('"cStorage111ExitJam2"', "cInBG3271", "cInBG3031", "MB3271"),
|
||||
('"cStorage111ExitJam3"', "cInBG3272", "cInBG3032", "MB3272"))):
|
||||
linie.jam_length = _name(laenge)
|
||||
linie.sensor = _name(sensor)
|
||||
linie.jam_sensor = _name(stau)
|
||||
linie.stopper = _name(stopper)
|
||||
_scanner(t.scanners[0], "cScannerBX2104", "bx2104",
|
||||
"=A01+UH02-BX2104~Ergebnisse_–_64_Bytes_1")
|
||||
t.safety = _name('"DB_InterfaceSafety".stFromSafety.EStopMainOF2.Q')
|
||||
t.release = '"DB_TRO_Test".TRO208'
|
||||
t.machine_state = _name("#stInOutControlUnitCabinetOF2")
|
||||
_jam(t.jam_in, '"DB_JamArea1101".stJam1101_2')
|
||||
_jam(t.jam_out, '"DB_JamArea1103".stJam1103_1')
|
||||
t.correction_station = _name("1")
|
||||
|
||||
ist, abgekuerzt = [], False
|
||||
for zeile in _normalisiert(templates.render(t)):
|
||||
treffer = re.fullmatch(r"REGION Sep Store (\d+)", zeile)
|
||||
if treffer:
|
||||
abgekuerzt = int(treffer.group(1)) > 3
|
||||
if abgekuerzt: # REGION Sep Store 4..19
|
||||
abgekuerzt = zeile != "END_REGION"
|
||||
continue
|
||||
if re.search(r"arInJamSensor\[(\d+)\]", zeile) and \
|
||||
int(re.search(r"\[(\d+)\]", zeile).group(1)) > 3:
|
||||
continue
|
||||
if re.search(r"arOutSeparatorStore\[(\d+)\]", zeile) and \
|
||||
int(re.search(r"\[(\d+)\]", zeile).group(1)) > 1:
|
||||
continue
|
||||
ist.append(zeile)
|
||||
_vergleich(ist, _referenz_region("FB_ILS_MTRO_PinStore_Auto.scl"))
|
||||
|
||||
|
||||
def test_template_ohne_bekannte_namen_hat_nur_markierte_luecken(templates):
|
||||
"""Mit den heutigen Platzhaltern: jede offene Stelle traegt den TODO-Marker."""
|
||||
t = _kontext("TRO07", "1Sep1Swi", ["SYS1"], ["TRO08", "TRO09"])
|
||||
@@ -121,7 +338,9 @@ def test_jedes_template_rendert_fuer_echte_anlagen(name, templates):
|
||||
text = render(document, f"{name}_tro.json", templates=templates)
|
||||
regionen = [z for z in text.splitlines() if z.startswith("REGION ")]
|
||||
assert len(regionen) == len(document.tros)
|
||||
assert "// Aus Template : FB_ILS_MTRO_1Sep1Swi" in text
|
||||
kopf = next(z for z in text.splitlines() if z.startswith("// Aus Template :"))
|
||||
for fb in {t.fb_block for t in document.tros if templates.has(t.fb_block)}:
|
||||
assert fb in kopf
|
||||
|
||||
|
||||
def test_strikter_undefined_bricht_ab(tmp_path):
|
||||
|
||||
Reference in New Issue
Block a user